Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9V2C100U5VSB Furnace: The Trane S9V2 is a 97% AFUE two-stage variable-speed gas furnace featuring a variable-speed blower motor and variable speed draft inducer for ultra-quiet, precise heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9V2C100U5VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619570 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9V2C080U5VSB Furnace: The Trane S9V2 is a 97% AFUE two-stage variable-speed gas furnace featuring a variable-speed blower motor and variable speed draft inducer for ultra-quiet, precise heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S9V2C080U5VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568151 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9X2C100U5PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque (CTM) blower motor for efficient, dependable heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, ENERGY STAR® certified. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9X2C100U5PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619572 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619564 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9X2C080U5PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque (CTM) blower motor for efficient, dependable heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, ENERGY STAR® certified. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S9X2C080U5PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568141 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7036 Air Conditioner: The Trane 5TTR7 is a 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9V2B060U3VSB Furnace: The Trane S9V2 is a 97% AFUE two-stage variable-speed gas furnace featuring a variable-speed blower motor and variable speed draft inducer for ultra-quiet, precise heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S9V2B060U3VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567569 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216533322 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and stable ease with a complete Trane Gas HVAC Equipment from Austin HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, built for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with quiet, reliable operation even in extreme temperatures. S9V2 Gas Furnace: Offers efficient, ultra-quiet heating with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal airflow and energy savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5060 Condenser Stages Single+ Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215830989 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor, silicon nitride hot surface igniter, and multi-port in-shot burners. Tubular steel heat exchanger, insulated cabinet. Reliable heating at an accessible price point. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620137 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568147 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7060 Air Conditioner: The Trane 5TTR7 is a 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor, silicon nitride hot surface igniter, and multi-port in-shot burners. Tubular steel heat exchanger, insulated cabinet. Reliable heating at an accessible price point. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568143 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less