Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7036 Air Conditioner: The Trane 5TTR7 is a 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9X2B060U4PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque (CTM) blower motor for efficient, dependable heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, ENERGY STAR® certified. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S9X2B060U4PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567525 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7024 Air Conditioner: The Trane 5TTR7 is a 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9V2B040U3VSB Furnace: The Trane S9V2 is a 97% AFUE two-stage variable-speed gas furnace featuring a variable-speed blower motor and variable speed draft inducer for ultra-quiet, precise heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 40k output. 5TXCB004 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S9V2B040U3VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 216566673 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a execute Trane Gas HVAC System from Austin HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for dependable performance in extreme temperatures. S9V2 Gas Furnace: Offers top efficiency and ultra-quiet, precise comfort with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal heating, airflow, and electricity savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5048 Condenser Stages Single+ Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215830939 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor, silicon nitride hot surface igniter, and multi-port in-shot burners. Tubular steel heat exchanger, insulated cabinet. Reliable heating at an accessible price point. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568127 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7048 Air Conditioner: The Trane 5TTR7 is a 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor, silicon nitride hot surface igniter, and multi-port in-shot burners. Tubular steel heat exchanger, insulated cabinet. Reliable heating at an accessible price point. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet C systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and trustworthy comfort with a complete Trane Gas HVAC System from Austin HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent year-round temperature and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S9V2 Gas Furnace: Offers efficient, ultra-quiet heating with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal airflow and energy savings. 5TXC Coil: Enhances heat transfer for warming and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4060 Condenser Stages Single Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215830639 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7036 Air Conditioner: The Trane 5TTR7 is a 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2B080M4PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 80k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8V2B080M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567513 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7036 Air Conditioner: The Trane 5TTR7 is a 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2B060M4PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8V2B060M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567517 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7024 Air Conditioner: The Trane 5TTR7 is a 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9X2B040U3PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque (CTM) blower motor for efficient, dependable heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, ENERGY STAR® certified. 40k output. 5TXCB003 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S9X2B040U3PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 216566639 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient, reliable comfort with a perform Trane Gas HVAC System offered by Austin HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for consistent comfort in extreme temperatures. S9V2 Gas Furnace: Combines top efficiency with ultra-quiet, precise comfort using a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for superior heating, airflow, and energy savings. 5TXC Coil: Optimizes heat transfer for thermal and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5042 Condenser Stages Single+ Furnace Model S9V2B060U4VSBB Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215830881 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Discover premium comfort with the Trane Heat Pump System offered by Austin HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and fuel efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet operation. Built for durability and reliable performance in all weather, ensuring consistent satisfaction year-round. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter operation, and improved energy efficiency. BAYHTR Heat Kits: Offers electric heat backup for extra warmth during cold months, ensuring trustworthy operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5060 Heat Pump Condenser Stages Single Air Handler Model 5TEM6D07AV51SA Air Handler Stages Single Air Handler Capacity (BTU) 42k-60k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1517BRKA Heat Kit Output 17KW AHRI 214078023 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Austin HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with resilient, quiet operation for reliable comfort in extreme temperatures. S9V2 Gas Furnace: Offers top efficiency and ultra-quiet, precise comfort with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal heating, airflow, and fuel savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4048 Condenser Stages Single Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215830599 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less