Trane 5TEM6 Air Handler offered by Austin HVAC Reliable HVAC Performance What's Included: The Trane 5TEM6 air handler offered by Austin HVAC features advanced variable-speed technology for precise climate control, energy efficiency, and consistent comfort in residential and light commercial settings. Designed to pair with Trane heat pumps and air conditioners, it improves system performance while operating quietly and reliably. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor: Ensures steady airflow, reduces temperature swings, and boosts energy efficiency. All-Aluminum Coil: Durable and corrosion-resistant for long-lasting use. Efficient Design: Maximizes SEER ratings when paired with compatible outdoor units. Comfort-R Optimized: Enhances humidity control for improved indoor comfort. Flexible Installation: Compact and versatile to fit various installation needs. The 5TEM6 is ideal for homeowners seeking optimized, reliable, and quiet comfort year-round. Paired with Trane s high-performance systems, it delivers optimized efficiency and superior indoor air quality. Why Choose Trane offered by Austin HVAC? Trane air handlers offer durable construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions.   Air Handler Model 5TEM6D05AV41SA Heat Kit Model BAYHTR1508BRK Capacity (BTU) 36K-48K Stages Variable Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TEM6 Air Handler offered by Austin HVAC Reliable HVAC Performance What's Included: The Trane 5TEM6 air handler offered by Austin HVAC features advanced variable-speed technology for precise climate control, energy efficiency, and consistent comfort in residential and light commercial settings. Designed to pair with Trane heat pumps and air conditioners, it improves system performance while operating quietly and reliably. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor: Ensures consistent airflow, reduces temperature swings, and boosts energy efficiency. All-Aluminum Coil: Sturdy and corrosion-resistant for long-lasting use. Efficient Design: Maximizes SEER ratings when paired with compatible outdoor units. Convenience-R Optimized: Enhances humidity control for improved indoor comfort. Flexible Installation: Compact and versatile to fit various installation needs. The 5TEM6 is ideal for homeowners seeking efficient, reliable, and quiet well-being year-round. Paired with Trane s high-performance systems, it delivers optimized efficiency and superior indoor air quality. Why Choose Trane offered by Austin HVAC? Trane air handlers offer durable construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions.   Air Handler Model 5TEM6D06AV41SA Heat Kit Model BAYHTR1510BRK Capacity (BTU) 36K-60K Stages Variable Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS  

Read more less

What's Included: The Trane 5TTR40 offered by Austin HVAC is a high-efficiency air conditioning condenser built for reliable cooling and durability. Featuring Trane s advanced technology, it includes a high-performance scroll compressor and an all-aluminum Spine Fin coil for superior heat transfer and corrosion resistance. The 5TTR40 has a galvanized steel cabinet with a powder-coated finish to withstand harsh weather, ensuring energy-efficient operation for residential and light commercial use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Trane 5TXC evaporator coil, this system improves cooling and humidity control. The 5TXC coil offered by Austin HVAC is an all-aluminum coil designed for maximum heat exchange and better corrosion resistance than traditional copper/aluminum coils. It includes a factory-installed thermal expansion valve (TXV) for precise refrigerant control and consistent indoor comfort. Together, the 5TTR40 condenser and 5TXC coil supply an energy-efficient, reliable cooling solution for a comfortable home environment.   Condenser Model 5TTR4048 Cooling Capacity 4 Ton Cooling Efficiency (SEER2) 14.3 Coil Model 5TXCC007 Type Cased Cabinet Size C Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS We deliver quality HVAC equipment, parts, and accessories for residential and light commercial warming, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and delivery.  

Read more less

Trane 5TTR40 air conditioner offered by Austin HVAC Efficient, Consistent and Reliable Dwelling Cooling What's Included: The Trane 5TTR40 air conditioner from Austin HVAC delivers durable, electricity-efficient cooling to keep your home comfortable year-round. Engineered with Trane s industry-leading reliability, this system provides 48,000 BTUs (4 tons) of steady performance, lower energy costs, and lasting comfort for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Built with precision and backed by a trusted HVAC name, the Trane 5TTR40 combines quality craftsmanship with proven efficiency to meet modern homeowner needs. Key Features: Energy-Efficient Cooling (Up to 14.3 SEER2)The Trane 5TTR40 delivers consistent, efficient cooling that reduces electricity bills without sacrificing comfort. Durable Climatuff® CompressorAt the core is the Climatuff® compressor, designed for reliable, quiet operation and long-term durability even in extreme conditions. Corrosion-Resistant CoilEquipped with Trane s spine fin coil, this unit maximizes heat transfer while resisting rust and corrosion for dependable operation season after season. Single-Stage Cooling PowerThe single-stage compressor provides steady cooling output for simple, efficient temperature control ideal for homeowners valuing reliability and easy maintenance. Sleek, Compact DesignA thoughtfully designed cabinet and compact footprint allow flexible installation in tight residential spaces, patios, or side yards. Why Choose the Trane 5TTR40 air conditioner offered by Austin HVAC? Homeowners trust Trane for its reputation for reliability and long-term performance. The 5TTR40 Series offers a balance of affordability, efficiency, and proven engineering. Paired with a compatible Trane air handler or furnace, it creates a complete high-performance cooling system ensuring optimal comfort and efficiency year-round. With proper setup and maintenance, this Trane air conditioner delivers quiet, consistent, and dependable cooling, backed by Trane s limited 10-year parts warranty for peace of mind. Condenser Model 5TTR4048A1000A Size/Tonnage 4 Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 48,000 BTUs (4 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation, ensuring dependable year-round performance. All-Aluminum Spine Fin Coil: Resists corrosion for lasting efficiency and durability in tough environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending unit lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump suits homeowners seeking a balance of performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it creates a seamless equipment to maximize well-being and energy savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, reliable comfort backed by a trusted HVAC brand.   Condenser Model 5TWR4048A1000A Size/Tonnage 4-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 48,000 BTUs (4 tons) of durable, high-efficiency heating and cooling for residential use. Built with Trane s high-grade standards, this unit ensures reliable comfort and energy savings designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent temperature and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable operation and long life. Corrosion-Resistant CoilBuilt to resist harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingMaintains steady, dependable temperature control for comfort in all seasons. Sleek, Compact DesignOptimized for residential spaces with a small footprint and improved airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a reliable, energy-efficient heat pump that delivers strong heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5048A1000A Cooling Capacity 4 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

Read more less

What's Included: The Trane 5TTR50 offered by Austin HVAC is a high-efficiency air conditioning condenser built for reliable cooling and durability. Featuring Trane s advanced technology, it includes a high-performance scroll compressor and an all-aluminum Spine Fin coil for superior heat transfer and corrosion resistance. The galvanized steel cabinet with a powder-coated finish ensures durability and energy efficiency for residential and light commercial use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Trane 5TXC evaporator coil, this system improves cooling and humidity control. The 5TXC coil offered by Austin HVAC is an all-aluminum coil constructed for maximum heat exchange and better corrosion resistance than traditional copper/aluminum coils. Its factory-installed thermal expansion valve (TXV) provides precise refrigerant control for optimal efficiency and consistent comfort. Together, the 5TTR50 condenser and 5TXC coil furnish an energy-efficient, reliable cooling solution for a comfortable home environment.   Condenser Model 5TTR5048 Cooling Capacity 4 Ton Cooling Efficiency (SEER2) 15.2 Coil Model 5TXCC007 Type Cased Cabinet Size C Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and delivery.  

Read more less

Trane 5TTR50 air conditioner offered by Austin HVAC Efficient, Consistent and Reliable Home Cooling What's Included: The Trane 5TTR50 air conditioner from Austin HVAC delivers durable, energy-efficient cooling to keep your home comfortable year-round. Engineered with Trane s industry-leading reliability, this system provides 48,000 BTUs (4 tons) of consistent performance, lower fuel costs, and long-lasting comfort for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Built with precision and backed by a trusted HVAC name, the Trane 5TTR50 combines quality craftsmanship with proven efficiency to meet modern homeowners needs. Key Features: Energy-Productive Cooling (Up to 15 SEER2)The Trane 5TTR50 delivers consistent, efficient cooling that reduces electricity bills without sacrificing comfort. Durable Climatuff® CompressorAt the core is the Climatuff® compressor, designed for reliable, quiet operation and long-term durability even in extreme conditions. Corrosion-Resistant CoilEquipped with Trane s spine fin coil, this unit maximizes heat transfer while resisting rust and corrosion for dependable seasonal operation. Single-Stage Cooling PowerThe single-stage compressor provides steady cooling output for simple, efficient temperature control ideal for homeowners valuing reliability and easy maintenance. Sleek, Compact DesignA compact cabinet and footprint allow flexible installation in tight residential spaces, patios, or side yards. Why Choose the Trane 5TTR50 air conditioner offered by Austin HVAC? Homeowners trust Trane for its reputation for reliability and long-term performance. The 5TTR50 Series offers a balance of affordability, efficiency, and proven engineering. Paired with a compatible Trane air handler or furnace, it forms a complete high-functionality cooling system for year-round comfort and efficiency. With proper installation and maintenance, this Trane air conditioner delivers quiet, consistent, and dependable cooling, backed by Trane s limited 10-year parts warranty for peace of mind. Condenser Model 5TTR5048A1000A Size/Tonnage 4 Ton Cooling Efficiency (SEER2) 15 Stages Single Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Trane S8X1A040M3PSCA furnace offered by Austin HVAC delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Single-Stage Heating: Provides reliable, consistent heating for steady warmth. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Quiet Execution: Designed for smooth, low-noise operation. The Trane S8X1A040M3PSCA furnace from Austin HVAC is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8X1A040M3PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1 furnace offered by Austin HVAC delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide stable comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides productive heating while managing energy costs. Single-Stage Heating: Ensures reliable, consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Allows versatile installation in various spaces. The Trane S8X1 furnace offered by Austin HVAC is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort.   Furnace Model S8X1B040M2PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X2 furnace offered by Austin HVAC provides reliable, efficient heating for residential use. With an 80% AFUE rating, it balances energy savings and consistent warmth. Its two-stage heating and multi-speed blower improve comfort and temperature control for steady indoor climate management. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Delivers cost-effective heating with energy savings. Two-Stage Heating Adjusts heat output for better comfort, efficiency, and quieter running. Multi-Speed Blower Improves airflow and system compatibility for balanced indoor air. Durable Construction Built with quality materials for long-lasting performance and low maintenance. Flexible Installation Fits various dwelling layouts and HVAC setups. The Trane S8X2 furnace offered by Austin HVAC is a reliable choice for homeowners seeking efficiency and comfort. Paired with a Trane cooling system, it offers comprehensive year-round climate control.   Furnace Model S8X2A040M3PSCA Capacity (BTU) 40K Stages Two-Stage Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local <

Read more less

What's Included: The Trane S8X1A040M3PSCA furnace offered by Austin HVAC delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 90% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Variable-Speed ECM Blower Motor: Improves airflow control, reduces noise, and enhances indoor air high-grade. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Sealed Combustion System: Enhances safety and efficiency by reducing heat loss. Quiet Operation: Designed for smooth, low-noise operation. The Trane S9V2C080U5VSBB furnace from Austin HVAC is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8V2A040M3PCBA Capacity (BTU) 40K Stages Single-Stage Cabinet Size  A AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local  

Read more less