Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Austin HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S9X1 Gas Furnace Provides consistent heating with a high-efficiency single-stage gas valve and durable construction, enhancing energy savings and indoor satisfaction. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5030 Condenser Stages Single+ Furnace Model S9X1B060U4PSBA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215474384 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Trane 5TEM4 Air Handler Reliable HVAC Performance What's Included: The Trane 5TEM4 air handler from Austin HVAC provides efficient comfort for residential and light commercial spaces. Available in various sizes, it pairs seamlessly with Trane s single-stage cooling and heating systems for year-round climate control.   Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Fuel-Efficient Performance: Optimized airflow ensures consistent indoor comfort. All-Aluminum Coil: Corrosion-resistant for durability and improved efficiency. Compact Design: Multiple cabinet sizes fit versatile installation spaces. Quiet Operation: Engineered to minimize noise for a peaceful environment. Trusted Trane Quality: Backed by Trane s reputation for reliability and performance. This air handler suits various HVAC systems, delivering efficient heating and cooling when paired with a compatible Trane outdoor condenser. Ideal for homes and businesses seeking comfort and energy savings. Why Choose Trane offered by Austin HVAC? Trane air handlers from Austin HVAC offer durable construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions.   Air Handler Model 5TEM4B02AC21SA Heat Kit Model BAYHTR1505BRK Capacity (BTU) 18K-24K Stages Single Cabinet Size B Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TEM6 Air Handler offered by Austin HVAC Reliable HVAC Performance What's Included: The Trane 5TEM6 air handler offered by Austin HVAC features advanced variable-speed technology for precise climate control, energy efficiency, and consistent comfort in residential and light commercial settings. Designed to pair with Trane heat pumps and air conditioners, it improves equipment performance while operating quietly and reliably. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor: Ensures steady airflow, reduces temperature swings, and boosts energy efficiency. All-Aluminum Coil: Durable and corrosion-resistant for long-lasting use. Efficient Design: Maximizes SEER ratings when paired with compatible outdoor units. Comfort-R Optimized: Enhances humidity control for improved indoor comfort. Flexible Installation: Compact and versatile to fit various setups. The 5TEM6 is ideal for homeowners seeking efficient, reliable, and quiet comfort year-round. Paired with Trane s high-performance systems, it delivers optimized efficiency and superior indoor air quality. Why Choose Trane offered by Austin HVAC? Trane air handlers offer durable construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions.   Air Handler Model 5TEM6B02AV21SA Heat Kit Model BAYHTR1505BRK Capacity (BTU) 18K-24K Stages Variable Cabinet Size B Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TEM4 Air Handler Reliable HVAC Performance What's Included: The Trane 5TEM4 air handler from Austin HVAC provides efficient, reliable satisfaction for residential and light commercial spaces. Available in multiple sizes, it pairs with Trane s single-stage cooling and heating systems for year-round climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Performance: Optimized airflow ensures consistent indoor comfort. All-Aluminum Coil: Corrosion-resistant for durability and improved efficiency. Compact Design: Multiple cabinet sizes fit various installation spaces. Quiet Operation: Engineered to minimize noise for a peaceful environment. Trusted Trane Quality: Backed by Trane s reputation for reliability and performance. This air handler suits various HVAC systems, delivering efficient heating and cooling when paired with a compatible Trane outdoor condenser. Ideal for homes and businesses seeking satisfaction and energy savings. Why Choose Trane offered by Austin HVAC? Trane air handlers from Austin HVAC offer durable construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions.   Air Handler Model 5TEM4B03AC31SA Heat Kit Model BAYHTR1505BRK Capacity (BTU) 18K-30K Stages Single Cabinet Size B Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TEM6 Air Handler offered by Austin HVAC Reliable HVAC Performance What's Included: The Trane 5TEM6 air handler offered by Austin HVAC features advanced variable-speed technology for precise climate control, energy efficiency, and consistent comfort in residential and light commercial settings. Crafted to pair with Trane heat pumps and air conditioners, it enhances unit performance with quiet operation and reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor: Ensures consistent airflow, reduces temperature swings, and improves energy efficiency. All-Aluminum Coil: Durable and corrosion-resistant for long-lasting use. Efficient Design: Maximizes SEER ratings when paired with compatible outdoor units. Comfort-R Optimized: Enhances humidity control for better indoor comfort. Flexible Installation: Compact and versatile to fit various installation needs. The 5TEM6 is ideal for homeowners seeking efficient, reliable, and quiet comfort year-round. Paired with Trane s high-performance systems, it delivers optimized efficiency and superior indoor air quality. Why Choose Trane offered by Austin HVAC? Trane air handlers offer sturdy construction, reliable performance, and efficient operation for homeowners and businesses seeking quality indoor air solutions. Air Handler Model 5TEM6B03AV21SA Heat Kit Model BAYHTR1505BRK Capacity (BTU) 18K-30K Stages Variable Cabinet Size B Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS  

Read more less

What's Included: The Trane 5TTR40 offered by Austin HVAC is a high-efficiency air conditioning condenser built for stable cooling and durability. Featuring Trane s advanced technology, it includes a superior scroll compressor and an all-aluminum Spine Fin coil for superior heat transfer and corrosion resistance. The galvanized steel cabinet with a powder-coated finish ensures durability and energy efficiency for residential and light commercial use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Trane 5TXC evaporator coil, this system improves cooling and humidity control. The 5TXC coil offered by Austin HVAC is an all-aluminum coil that maximizes heat exchange and resists corrosion better than traditional copper/aluminum coils. Its factory-installed thermal expansion valve (TXV) provides precise refrigerant control for optimal efficiency and consistent comfort. Together, the 5TTR40 condenser and 5TXC coil deliver an energy-efficient, reliable cooling solution for a comfortable home environment.   Condenser Model 5TTR4024 Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 14.3 Coil Model 5TXCB003AS3HCA Type Cased Cabinet Size B Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering trustworthy products and solutions for installation and delivery.  

Read more less

Trane 5TTR40 air conditioner offered by Austin HVAC Efficient, Consistent and Reliable Home Cooling What's Included: The Trane 5TTR40 air conditioner from Austin HVAC delivers durable, energy-efficient cooling to keep your home comfortable year-round. Engineered with Trane s industry-leading reliability, this configuration provides 24,000 BTUs (2 tons) of consistent performance, lower energy costs, and long-lasting satisfaction for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM elements warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Built with precision and backed by a trusted HVAC name, the Trane 5TTR40 combines quality craftsmanship with proven efficiency to meet modern homeowners needs. Key Features: Power-Efficient Cooling (Up to 14.3 SEER2)The Trane 5TTR40 offers consistent, efficient cooling that reduces electricity bills without sacrificing comfort. Durable Climatuff® CompressorAt the core is the Climatuff® compressor, designed for reliable, quiet operation and long-term durability even in extreme conditions. Corrosion-Resistant CoilEquipped with Trane s spine fin coil, this unit maximizes heat transfer while resisting rust and corrosion for dependable seasonal operation. Single-Stage Cooling PowerThe single-stage compressor delivers steady cooling for simple, efficient temperature control ideal for homeowners valuing reliability and easy maintenance. Sleek, Compact DesignA compact cabinet and footprint allow flexible installation in tight residential spaces, patios, or side yards. Why Choose the Trane 5TTR40 air conditioner offered by Austin HVAC? Homeowners trust Trane for its reliability and long-term performance. The 5TTR40 Series blends affordability, efficiency, and proven engineering. Paired with a compatible Trane air handler or furnace, it forms a complete high-performance cooling system for year-round comfort and efficiency. With proper installation and maintenance, this Trane air conditioner delivers quiet, consistent cooling, backed by Trane s limited 10-year parts warranty for peace of mind. Condenser Model 5TTR4024A1000A Size/Tonnage 2 Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 24,000 BTUs (2 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, engineered to perform in all seasons and endure tough outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation and dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in harsh environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending the unit s lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump balances performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it creates a seamless system to maximize indoor comfort and energy savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, stable comfort year after year, backed by a trusted HVAC brand.   Condenser Model 5TWR4024A1000A Size/Tonnage 2-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

Read more less

Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 24,000 BTUs (2 tons) of high-efficiency heating and cooling for residential use. Built with Trane s commitment to quality, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent heating and cooling while reducing electricity use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable performance and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Thermal and CoolingMaintains steady, dependable temperature control for satisfaction in every season. Sleek, Compact DesignOptimized for residential spaces with a space-saving footprint and improved airflow. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a reliable, energy-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5024A1000A Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Trane 5TTR50 offered by Austin HVAC is a high-efficiency air conditioning condenser built for reliable cooling and durability. Featuring Trane s advanced technology, it includes a high-performance scroll compressor and an all-aluminum Spine Fin coil for superior heat transfer and corrosion resistance. The galvanized steel cabinet with a powder-coated finish ensures durability and energy efficiency for residential and light commercial use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Trane 5TXC evaporator coil, this system improves cooling and humidity control. The 5TXC coil is an all-aluminum design that maximizes heat exchange and resists corrosion better than traditional copper/aluminum coils. Its factory-installed thermal expansion valve (TXV) ensures precise refrigerant control for optimal efficiency and consistent comfort. Together, the 5TTR50 condenser and 5TXC coil deliver electricity-efficient cooling and long-term reliability for a comfortable house environment.   Condenser Model 5TTR5024 Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 15.2 Coil Model 5TXCB003 Type Cased Cabinet Size B Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With established brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and delivery.  

Read more less

Trane 5TTR50 air conditioner offered by Austin HVAC Efficient, Consistent and Reliable Home Cooling What's Included: The Trane 5TTR50 air conditioner from Austin HVAC delivers long-lasting, energy-efficient cooling to keep your home comfortable year-round. Engineered with Trane s industry-leading reliability, this configuration provides 24,000 BTUs (2 tons) of consistent performance, lower energy costs, and lasting comfort for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Built with precision and backed by a trusted HVAC name, the Trane 5TTR50 combines quality craftsmanship with proven efficiency to meet modern homeowners needs. Key Features: Energy-Efficient Cooling (Up to 15 SEER2)The Trane 5TTR50 offers steady, efficient cooling that reduces electricity bills without sacrificing comfort. Durable Climatuff® CompressorAt the core is the Climatuff® compressor, designed for reliable, quiet operation and long-term durability even in extreme conditions. Corrosion-Resistant CoilEquipped with Trane s spine fin coil, this unit maximizes heat transfer while resisting rust and corrosion for dependable seasonal operation. Single-Stage Cooling PowerThe single-stage compressor provides steady cooling output for simple, efficient temperature control ideal for reliability and easy maintenance. Sleek, Compact DesignA compact cabinet and footprint allow flexible installation in tight residential spaces, patios, or side yards. Why Choose the Trane 5TTR50 air conditioner offered by Austin HVAC? Homeowners trust Trane for its reputation for reliability and long-term performance. The 5TTR50 Series blends affordability, efficiency, and proven engineering. Paired with a compatible Trane air handler or furnace, it creates a complete high-functionality cooling system for optimal comfort and efficiency year-round. With proper installation and maintenance, this Trane air conditioner delivers quiet, consistent, and dependable cooling, backed by Trane s limited 10-year parts warranty for peace of mind. Condenser Model 5TTR5024A1000A Size/Tonnage 2 Ton Cooling Efficiency (SEER2) 15 Stages Single Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS

Read more less

What's Included: The Trane 5TTR40 offered by Austin HVAC is a high-efficiency air conditioning condenser built for reliable cooling and durability. Featuring Trane s advanced technology, it includes a high-performance scroll compressor and an all-aluminum Spine Fin coil for superior heat transfer and corrosion resistance. The 5TTR40 has a galvanized steel cabinet with a powder-coated finish to withstand harsh weather, ensuring energy-efficient operation for residential and light commercial use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Trane 5TXC evaporator coil, this system improves cooling and humidity control. The 5TXC coil offered by Austin HVAC is an all-aluminum coil designed for maximum heat exchange and better corrosion resistance than traditional copper/aluminum coils. Its factory-installed thermal expansion valve (TXV) ensures precise refrigerant control for optimal efficiency and consistent comfort. Together, the 5TTR40 condenser and 5TXC coil deliver an energy-efficient, reliable cooling solution for a comfortable home environment.   Condenser Model 5TTR4030 Cooling Capacity 2.5 Ton Cooling Efficiency (SEER2) 14.3 Coil Model 5TXCB003AS3HCA Type Cased Cabinet Size B Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS We provide premium HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and delivery.  

Read more less