GE Appliances NS16 - 5-Ton Single Stage Heat Pump w/ Constant-Speed Fan Coil + 8122772 Heat Kit - 14.3 SEER2 with Install

Description

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.

What's Included:

  • NS16H60SA5 Heat Pump: The GE Appliances NS16H60SA5 is a single-stage heat pump delivering 14.3 SEER2 cooling. Tube-and-fin coil, optimized airflow design, on-demand defrost. R-454B low-GWP refrigerant. 10-year parts and compressor warranty when registered.
  • NAM60E1TA5S Air Handler: The GE Appliances NAM fan coil air handler features a constant-speed PSC blower motor for reliable airflow delivery. Factory-installed TXV and R-454B compatibility provide consistent performance with GE heat pump condensers.
  • 8122772 Electric Heat Kit: The 8122772 electric heat strip kit installs inside the air handler to provide supplemental electric heating during cold weather, available in multiple kW outputs (5/7.5/10/15 kW) to meet your home's heating requirements. Required for heat pump operation in heating mode.

Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.

Professional Installation

  • Removal & haul-off of existing equipment
  • Installation of new equipment and all included parts
  • Refrigerant line connection, evacuation & charge to OEM spec
  • Full system start-up, airflow check & operational testing
  • Permit pulled and permit fees paid with the local jurisdiction
  • Final inspection and job-site clean-up
  • Performed by a licensed, insured HVAC contractor

Heat Pump System Kit

  • Electrical & mounting disconnect, A/C whip, condenser pad
  • Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation
  • Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation
  • Drainage & safety secondary drain pan, float switch, P-trap
  • PVC fittings couplings, elbows, adapters for condensate line

Not Included

This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate:

  • Electrical panel upgrades or new breakers beyond the standard disconnect
  • Ductwork modifications, repairs, replacement, or new runs
  • New refrigerant line set (existing line set is reused when in good condition)
  • Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included)
  • Condenser relocation to a new exterior position
  • Gas line extension, re-routing, or new gas line installation
  • Crane or rooftop rigging for difficult equipment access
  • Condensate drain line rework beyond the immediate connection at the unit
  • Thermostat upgrades (standard thermostat reuse only)
  • Asbestos abatement, mold remediation, or hazardous material handling
  • Carpentry, drywall, paint, or flooring repair after installation

If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.

5-Year Labor Warranty

Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.

Bundle Size/Tonnage

5-Ton

Bundle Cooling Efficiency (SEER2)

14.3

Bundle Heating Efficiency (HSPF2)

7.5

Heat Pump Model

NS16H60SA5

Heat Pump Stages

Single

Air Handler Model

NAM60E1TA5S

Air Handler Blower

PSC

Air Handler Capacity

57k

Heat Kit Model

8122772

Heat Kit Output

5/7.5/10/15 kW

Heat Source

Electric Heat Pump

AHRI

216497752

Refrigerant

R-454B

Warranty

10 Year Parts, 10 Year Compressor
(When Registered with OEM)

RESOURCES

GE Appliances NS16 - 5-Ton Single Stage Heat Pump w/ Constant-Speed Fan Coil + 8122772 Heat Kit - 14.3 SEER2 with Install

Product form

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused... Read more

$11,530.74 Excl. VAT

    SKU: ALC-GE-HPS-143-60-1S-PSC

    Description

    GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.

    What's Included:

    • NS16H60SA5 Heat Pump: The GE Appliances NS16H60SA5 is a single-stage heat pump delivering 14.3 SEER2 cooling. Tube-and-fin coil, optimized airflow design, on-demand defrost. R-454B low-GWP refrigerant. 10-year parts and compressor warranty when registered.
    • NAM60E1TA5S Air Handler: The GE Appliances NAM fan coil air handler features a constant-speed PSC blower motor for reliable airflow delivery. Factory-installed TXV and R-454B compatibility provide consistent performance with GE heat pump condensers.
    • 8122772 Electric Heat Kit: The 8122772 electric heat strip kit installs inside the air handler to provide supplemental electric heating during cold weather, available in multiple kW outputs (5/7.5/10/15 kW) to meet your home's heating requirements. Required for heat pump operation in heating mode.

    Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.

    Professional Installation

    • Removal & haul-off of existing equipment
    • Installation of new equipment and all included parts
    • Refrigerant line connection, evacuation & charge to OEM spec
    • Full system start-up, airflow check & operational testing
    • Permit pulled and permit fees paid with the local jurisdiction
    • Final inspection and job-site clean-up
    • Performed by a licensed, insured HVAC contractor

    Heat Pump System Kit

    • Electrical & mounting disconnect, A/C whip, condenser pad
    • Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation
    • Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation
    • Drainage & safety secondary drain pan, float switch, P-trap
    • PVC fittings couplings, elbows, adapters for condensate line

    Not Included

    This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate:

    • Electrical panel upgrades or new breakers beyond the standard disconnect
    • Ductwork modifications, repairs, replacement, or new runs
    • New refrigerant line set (existing line set is reused when in good condition)
    • Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included)
    • Condenser relocation to a new exterior position
    • Gas line extension, re-routing, or new gas line installation
    • Crane or rooftop rigging for difficult equipment access
    • Condensate drain line rework beyond the immediate connection at the unit
    • Thermostat upgrades (standard thermostat reuse only)
    • Asbestos abatement, mold remediation, or hazardous material handling
    • Carpentry, drywall, paint, or flooring repair after installation

    If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.

    5-Year Labor Warranty

    Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.

    Bundle Size/Tonnage

    5-Ton

    Bundle Cooling Efficiency (SEER2)

    14.3

    Bundle Heating Efficiency (HSPF2)

    7.5

    Heat Pump Model

    NS16H60SA5

    Heat Pump Stages

    Single

    Air Handler Model

    NAM60E1TA5S

    Air Handler Blower

    PSC

    Air Handler Capacity

    57k

    Heat Kit Model

    8122772

    Heat Kit Output

    5/7.5/10/15 kW

    Heat Source

    Electric Heat Pump

    AHRI

    216497752

    Refrigerant

    R-454B

    Warranty

    10 Year Parts, 10 Year Compressor
    (When Registered with OEM)

    RESOURCES

    Recently viewed products

      © 2026 Austin HVAC, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • Shop Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account