Shop By Brand
-
Goodman Goodman - 3.5 - Ton - 14.3 SEER2 - Gas Furnace System - 80% AFUE - Single-Stage - Upflow Only Gas System with Install
The Goodman HVAC system offered by Austin HVAC combines an energy-productive condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Built for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Its sturdy build ensures reliable comfort in cold weather. The Goodman CAPTA evaporator coil: Designed for vertical use, with all-aluminum construction to resist corrosion. The insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long setup life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort. The condenser, furnace, and coil work together to deliver energy-efficient cooling, reliable heating, and improved heat transfer for an ideal indoor environment. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214860003 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY
$8,020.19
-
Goodman Goodman - 3.5 - Ton - 14.3 SEER2 - Gas Furnace System - 80% AFUE - Variable Speed - Horizontal Only Gas System with Install
The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a stable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact cabinet and quiet operation suit residential installations. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower motor for precise temperature control and improved energy efficiency. Durable, quiet, and flexible for reliable home heating year-round. Goodman CHPTA Evaporator Coil: All-aluminum coil designed for horizontal use, with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Fuel Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 214859908 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY
$8,898.04
-
Goodman Goodman - 3.5 - Ton - 14.3 SEER2 - Gas Furnace System - 80% AFUE - Variable Speed - Upflow Only Gas System with Install
The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower for precise temperature control and energy efficiency. Durable, quiet, and flexible for reliable home heating year-round. The Goodman CAPTA evaporator coil: Designed for vertical use with all-aluminum construction to resist corrosion. Its insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Setup Benefits: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration for complete home heating and cooling. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-efficient cooling, trustworthy heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214859910 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY
$8,949.63
-
Goodman Goodman - 3.5 - Ton - 14.3 SEER2 - Gas Furnace System - 96% AFUE - Horizontal Only Gas System with Install
The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, delivering dependable, energy-conscious heating for homes. Goodman CHPTA Evaporator Coil: A horizontal, all-aluminum coil with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Functionality: Built to Goodman s quality standards for reliable operation and long system life. Quiet Operation: Designed to minimize noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round well-being by combining energy-productive cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 214859967 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY <
$8,935.02
-
Goodman Goodman - 3.5- Ton - 14.3 SEER2 - Gas Furnace System- 96% AFUE - Upflow Only Gas System with Install
The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, delivering reliable, energy-conscious heating for homes. The Goodman CAPTA evaporator coil: Designed for vertical use, this all-aluminum coil resists corrosion. Its insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your house, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214859969 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY <
$8,986.60
-
Goodman Goodman - 3.5-Ton - 'C' Cabinet - Horizontal - Cased Evaporator Coil With Install
What's Included: The Goodman CHPTA coil from Austin HVAC is an advanced evaporator coil that improves performance and energy efficiency in residential HVAC systems. Made with durable materials and modern engineering, it ensures excellent heat transfer and reliable operation with Goodman air conditioners, heat pumps, and furnaces. Ideal for homeowners seeking better comfort and lower energy costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit: Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included: This listing covers the equipment and conventional installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, substitution, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Durable Aluminum Tubes and Fins: Offers superior corrosion resistance for long-lasting performance in various environments. Optimized Heat Exchange Design: Enhances cooling and heating efficiency for consistent indoor comfort. Sturdy, Leak-Resistant Construction: Made with durable materials to reduce leaks and maintenance over time. Multi-Position Flexibility: Designed for horizontal installation in various system setups. Quiet and Dependable Operation: Minimizes noise for a peaceful home environment. The Goodman CHPTA coil from Austin HVAC is a reliable, cost-effective way to boost your HVAC system s efficiency and lifespan. Paired with Goodman components, it delivers year-round comfort and electricity savings. Coil Model CHPTA4230C3 Type Cased Cabinet Size C Capacity Range 3-Ton Configuration Horizontal Refrigerant R-32 Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil PRODUCT BROCHURE PRODUCT SPECS LIMITED WARRANTY
$2,317.96
-
Goodman Goodman - 3.5-Ton - 'C' Cabinet - Upflow/Downflow - Cased Evaporator Coil With Install
What's Included: The Goodman CAPTA coil from Austin HVAC is a high-performance evaporator coil designed to improve the efficiency and reliability of residential HVAC systems. Made with long-lasting materials and optimized for fuel savings, it ensures productive heat transfer and reliable operation when paired with Goodman air conditioners, heat pumps, and furnaces. It s a solid choice for homeowners seeking better comfort and system longevity. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit: Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Aluminum Coil Construction: Offers excellent corrosion resistance and long-lasting performance in various environments. Precision Heat Exchange Design: Maximizes cooling and heating efficiency for consistent indoor comfort. Rugged, Leak-Resistant Build: Reduces maintenance and ensures long-term reliability. Flexible Installation Options: Compatible with vertical setups, including upflow and downflow, for easy HVAC integration. Quiet Performance: Designed for smooth, low-noise operation to maintain a comfortable home environment. The Goodman CAPTA coil from Austin HVAC is a stable, energy-efficient component that optimizes HVAC performance. Paired with Goodman products, it delivers year-round ease with energy savings and dependability. Coil Model CAPTA4230C3 Type Cased Cabinet Size C Capacity Range 3.5-Ton Configuration Vertical Refrigerant R-32 Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil PRODUCT BROCHURE PRODUCT SPECS LIMITED WARRANTY
$2,369.55
-
Goodman Goodman - 3.5-Ton - 14.3 SEER2 - Single-Stage - Condenser and Horizontal Coil Bundle With Install
What's Included: The Goodman GLXS4BA offered by Austin HVAC is a high-efficiency air conditioning condenser built for reliable cooling and durability. It features an energy-efficient scroll compressor and a high-functionality coil for excellent heat transfer and consistent indoor comfort. The heavy-gauge galvanized steel cabinet with a corrosion-resistant finish ensures durability in harsh weather. Quiet and dependable, the GLXS4BA is ideal for residential cooling. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Paired with the Goodman CHPTA evaporator coil offered by Austin HVAC, this system improves cooling efficiency and humidity control. The CHPTA coil has durable copper tubing, high-efficiency aluminum fins, and a factory-installed thermal expansion valve (TXV) for precise refrigerant control, optimizing power use and comfort. Together, the Goodman GLXS4BA condenser and CHPTA coil deliver energy savings, reliable function, and year-round comfort for residential use. Condenser Model GLXS4BA4210 Cooling Capacity 3.5 Ton Cooling Efficiency (SEER2) 14.3 Coil Model CHPTA4230C3 Type Cased Cabinet Size C Capacity Range 3.5 Ton Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS
$5,313.63
-
Goodman Goodman - 3.5-Ton - 14.3 SEER2 - Single-Stage - Condenser and Upflow Coil Bundle
Goodman is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Goodman products meet top standards in residential cooling. Whether upgrading or installing new, Goodman offers advanced solutions to keep your home comfortable year-round. What's Included: GLXS4BA Condenser: A single-stage, energy-efficient air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. CAPTA Evaporator Coil: An all-aluminum upflow/downflow coil with a corrosion-resistant design and insulated, compact cabinet that reduces energy loss and noise " ideal for tight spaces and long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model GLXS4BA4210 Condenser Stages Single Coil Model CAPTA4230C3 Coil Cabinet Size C Refrigerant R-32 Warranty 10 Year Units, 10 Year Compressor (When Registered with OEM)
$5,365.23
-
Goodman Goodman - 3.5-Ton - 14.3 SEER2 - Single-Stage - Condenser With Install
Goodman GLXS4BA Air Conditioner offered by Austin HVAC Efficient, Consistent and Reliable Property Cooling What's Included: The Goodman GLXS4BA Air Conditioner offered by Austin HVAC delivers 42,000 BTUs (3.5 Tons) of energy-efficient cooling designed to keep your home comfortable all summer. Built with Goodman s proven commitment to superior and performance, this system offers a blend of affordability, durability, and efficiency for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM elements warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Whether replacing an older AC or upgrading, the Goodman GLXS4BA provides consistent comfort, quiet operation, and long-lasting reliability backed by a trusted HVAC brand. Key Features: Energy-Efficient Design (Up to 14.3 SEER2)Reduces resources use while maintaining optimal comfort, lowering monthly cooling costs without sacrificing performance. High-Performance CompressorPrecision-engineered for smooth, quiet operation and reliable cooling year-round, even in demanding climates. All-Aluminum CoilCorrosion-resistant aluminum fin coil maximizes heat transfer and efficiency, helping the system run cooler and longer with less maintenance. Single-Stage Cooling SystemDelivers steady, reliable temperature control and simple, dependable operation ideal for homes. Compact, Durable ConstructionCompact cabinet with heavy-gauge steel design allows easy installation and long-term protection against elements. Why Choose the Goodman GLXS4BA Air Conditioner offered by Austin HVAC? Homeowners trust Goodman for effectiveness and value. The GLXS4BA series balances comfort, efficiency, and reliability at a competitive price. Paired with a matching Goodman air handler or furnace, it forms a complete central air conditioning system that maximizes comfort and efficiency throughout your home. With proper installation and maintenance, this Goodman air conditioner offers years of quiet, dependable cooling backed by Goodman s 10-year parts limited warranty for peace of mind. Condenser Model GLXS4BA4210 Size/Tonnage 3.5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-32 Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS
$4,294.88
-
Goodman Goodman - 3.5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install
Goodman GLZS4BA Heat Pump offered by Austin HVAC Efficient and Reliable Year-Round Comfort What's Included: The Goodman GLZS4BA Heat Pump offered by Austin HVAC delivers 42,000 BTUs of energy-efficient heating and cooling for residential use. Built with Goodman s proven engineering and durable construction, it ensures consistent comfort, quiet operation, and long-term reliability year-round. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Heating and Cooling: Provides reliable performance to maintain comfortable indoor temperatures year-round while reducing energy use. High-Performance Scroll Compressor: Ensures quiet, efficient operation for reliable heating and cooling in all climates. Enhanced Aluminum Fin Coil: Offers superior heat transfer with excellent corrosion resistance for lasting efficiency. Defrost Control: Automatically activates in winter to maintain performance and reduce frost buildup. Compact and Durable Construction: Fits residential spaces and withstands elements for long-term reliability. Why Choose the Goodman GLZS4BA offered by Austin HVAC? This heat pump is ideal for homeowners seeking a versatile, resources-productive HVAC system for heating and cooling. Paired with a compatible Goodman air handler, it creates a complete solution that optimizes comfort and energy savings. Backed by Goodman s reputation for quality and reliability, the GLZS4BA offers a balance of performance and durability for uniform comfort in all seasons. Condenser Model GLZS4BA4210 Size/Tonnage 3.5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-32 Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser INSTALLATION GUIDE LIMITED WARRANTY PRODUCT SPECS
$4,797.58
-
Goodman Goodman - 3.5-Ton - 15.2 SEER2 - Single-Stage - Condenser With Install
Goodman GLXS5BA Air Conditioner offered by Austin HVAC Powerful, Energy-Efficient Cooling for Your Home What's Included: The Goodman GLXS5BA Air Conditioner offered by Austin HVAC delivers 42,000 BTUs (3.5 tons) of powerful, energy-efficient cooling to keep your home comfortable year-round. Built with Goodman s proven quality and performance, this central air conditioning system balances efficiency, durability, and reliability for residential use. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Ideal for residential installations, the GLXS5BA combines durability, quiet operation, and energy-saving performance in a compact, weather-resistant design. Key Features: Energy-Efficient Cooling (Up to 15.2 SEER2) The GLXS5BA delivers steady cooling while using less energy, reducing electricity bills without sacrificing comfort. High-Functionality Scroll Compressor A precision-engineered scroll compressor ensures smooth, quiet operation and consistent temperature control even on hot days. Upgraded All-Aluminum Fin Coil The all-aluminum coil resists corrosion and maintains peak efficiency season after season. Single-Stage Cooling Unit The single-stage compressor provides reliable temperature control for everyday residential use. Compact, Weather-Resistant Cabinet The GLXS5BA s compact design fits tight spaces, while its heavy-gauge steel and powder-coat finish protect against harsh outdoor elements. Why Choose the Goodman GLXS5BA Air Conditioner offered by Austin HVAC? Homeowners trust Goodman for affordable, reliable ease. The GLXS5BA combines resources efficiency, cooling performance, and durability, making it a top value in residential HVAC. Paired with a compatible Goodman air handler or gas furnace, the GLXS5BA forms a complete central air system that maximizes efficiency, improves airflow, and maintains steady comfort year-round. Backed by Goodman s 10-year parts limited warranty, this Goodman air conditioner offers peace of mind and long-lasting performance from a trusted HVAC brand. Condenser Model GLXS5BA4210 Size/Tonnage 3.5-Ton Cooling Efficiency (SEER2) 15.2 Stages Single Refrigerant R-32 Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT SPECS
$5,140.29