The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H36HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.65 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U070S3BR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCUC30BT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.65 Heat Pump Model NS18H36HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U070S3BR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC30BT5S Coil Cabinet Size B AHRI 217124052 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H24HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.4 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U070S3BR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCUC30BT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 16.4 Heat Pump Model NS18H24HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U070S3BR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC30BT5S Coil Cabinet Size B AHRI 217123969 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.05 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U090S5CR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC60DT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 17.05 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U090S5CR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC60DT5S Coil Cabinet Size D AHRI 217551314 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.65 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U090S5CR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC51CT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.65 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U090S5CR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC51CT5S Coil Cabinet Size C AHRI 217124234 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.2 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U090S5CR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC42CT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 16.2 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U090S5CR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC42CT5S Coil Cabinet Size C AHRI 217124192 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H36HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.95 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U070S3BR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC30BT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.95 Heat Pump Model NS18H36HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U070S3BR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC30BT5S Coil Cabinet Size B AHRI 217124098 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H24HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.65 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF80U070S3BR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC30BT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 16.65 Heat Pump Model NS18H24HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF80U070S3BR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC30BT5S Coil Cabinet Size B AHRI 217124030 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.55 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC60CT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.55 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC60CT5S Coil Cabinet Size C AHRI 216743610 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.1 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC49CT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC49CT5S Coil Cabinet Size C AHRI 216743598 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H36HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.6 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U070V3B Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC36BT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.6 Heat Pump Model NS18H36HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U070V3B Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC36BT5S Coil Cabinet Size B AHRI 216743579 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H24HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.15 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U070V3B Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC30BT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.15 Heat Pump Model NS18H24HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U070V3B Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC30BT5S Coil Cabinet Size B AHRI 216743559 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.5 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCHC51CT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC51CT5S Coil Cabinet Size C AHRI 216759803 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less