Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a high-performance heat pump condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS4B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology. Durable and quiet for trustworthy performance in any weather. AMST Air Handler: Optimized for superior airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and long-term reliability. HKTS Heat Kit: Supplemental electric heating for reliable warmth in colder months, ensuring year-round ease. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Durable Construction: Built for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful home environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman to keep your home comfortable year-round.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA3610 Condenser Stages Single Air Handler Model AMST36CU1300 Air Handler Cabinet Size C Heat Source Electric Heat Kit Model HKTSD15XB AHRI Number 215213859 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less

The RunTru all-electric HVAC unit offered by Austin HVAC, including the heat pump condenser, air handler, and heat kits, provides energy-efficient, reliable comfort for homes. Built by the trusted Trane family, this system combines advanced performance and affordability for year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s ideal for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Efficient heating and cooling with reliable heat transfer in varying weather. Durable construction withstands harsh elements. A5AHC Air Handler: Multi-speed blower delivers enhanced airflow, consistent temperature, and quiet operation. Energy-efficient and easy to install. BAYHTR Heat Kits: Electric heat backup for extra warmth during cold months, ensuring dependable operation in low temperatures. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3.5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Heat Pump Condenser Model A5HP4042 Heat Pump Condenser Stages Single Air Handler Model A5AHC006A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 24k-42k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRK* Heat Kit Output 10KW AHRI 215611034 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY   PRODUCT SPECS PRODUCT MANUAL  

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a high-performance condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS5B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology, built for durability and quiet operation. AMST Air Handler: Optimized for airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and reliability. HKTS Heat Kit: Provides supplemental electric heating for reliable warmth in colder months. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Durable Construction: Engineered for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful house environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman for year-round comfort.   Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLZS5BA2410 Condenser Stages Single Air Handler Model AMST24BU1300 Air Handler Cabinet Size B Heat Source Electric Heat Kit Model HKTSD08X1 AHRI Number 215381160 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less

Lennox is a dependable leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential thermal and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting performance and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and typical installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-036 Condenser Stages Single Air Handler Model CBK45UHPT-036 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 036K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215735588 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

The RunTru all-electric HVAC system offered by Austin HVAC, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for residential use. Designed by the trusted Trane family, this system combines advanced performance and affordability to maintain year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s an ideal solution for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Provides efficient heating and cooling, ensuring year-round comfort with reliable heat transfer in varying weather. Built to withstand harsh elements. A5AHC Air Handler: Equipped with a multi-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet execution. Built for energy efficiency and easy installation. BAYHTR Heat Kits: Offers electric heat backup for extra warmth during colder months, ensuring dependable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finalize setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Heat Pump Condenser Model A5HP4048 Heat Pump Condenser Stages Single Air Handler Model A5AHC006A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 36k-48k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 215611044 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)  

Read more less

  The RunTru all-electric HVAC system offered by Austin HVAC, including the heat pump condenser, air handler, and heat kits, provides energy-efficient, reliable comfort for homes. Designed by Trane, this system combines advanced operation and affordability for year-round indoor climate control. With heating, cooling, and electric heat backup, it s ideal for all-electric homes. What's Included: A5HP50 Heat Pump Condenser: Delivers efficient heating and cooling with reliable heat transfer in varying weather. Built durable to withstand harsh conditions. A5AHC Air Handler: Features a multi-speed blower for improved airflow, consistent temperature, quiet running, energy efficiency, and easy installation. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during cold months, ensuring dependable operation in low temperatures. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Seer 2 Heat Pump Condenser Model A5HP5042 Heat Pump Condenser Stages Single Air Handler Model A5AHC006A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 36k-48k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 215611102 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY   PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

The RunTru all-electric HVAC system offered by Austin HVAC, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for residential use. Designed by the trusted Trane family, this system combines advanced performance and affordability to maintain year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s an ideal all-electric solution for home comfort. What's Included: A5HP50 Heat Pump Condenser: Provides efficient heating and cooling with reliable heat transfer in varying weather. Built durable to withstand harsh elements. A5AHV Air Handler: Features a variable-speed blower for enhanced airflow, consistent temperature, and quiet operation. Designed for electricity efficiency and easy installation. BAYHTR Heat Kits: Electric heat backup for extra warmth during cold months, ensuring dependable operation in low temperatures. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3 -Ton Bundle Cooling Efficiency (SEER2) 15 Seer 2 Heat Pump Condenser Model A5HP5036 Heat Pump Condenser Stages Variable Air Handler Model A5AHV004A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 24k-42k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 214296500 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY   PRODUCT SPECS PRODUCT MANUAL  

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on electricity savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit designed for optimal heating and cooling, featuring Lennox s durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT Air Handler: Engineered for reliable performance and efficient airflow, it features a variable-speed blower motor and durable aluminum coil. Crafted to pair with Lennox outdoor units, it delivers quiet operation, improved humidity control, and long-lasting efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor satisfaction during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-030 Condenser Stages Single Air Handler Model CBK45UHVT-030 Air Handler Stages Single Stage - Variable Speed Motor Air Handler Capacity 30K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215712353 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT BROCHURE INSTALL INSTRUCTIONS Austin HVAC provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a high-operation heat pump condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS4B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology. Durable and quiet for reliable performance in any weather. AMST Air Handler: Optimized for superior airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and long-term reliability. HKTS Heat Kit: Supplemental electric heat for reliable warmth in colder months, ensuring year-round convenience. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Durable Construction: Built for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful home environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman to keep your home comfortable year-round.   Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLZS4BA4210 Condenser Stages Single Air Handler Model AMST42CU1300 Air Handler Cabinet Size C Heat Source Electric Heat Kit Model HKTSD15XB AHRI Number 215213860 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less

  The RunTru all-electric HVAC system offered by Austin HVAC, including the heat pump condenser, air handler, and heat kits, provides energy-efficient, trustworthy comfort for homes. Designed by the trusted Trane family, it combines advanced operation and affordability for year-round climate control. With heating, cooling, and supplemental electric heat, it s ideal for all-electric homes. What's Included:  A5HP50 Heat Pump Condenser: Delivers efficient heating and cooling with reliable heat transfer in varying weather. Built to withstand harsh elements. A5AHC Air Handler: Features a multi-speed blower for improved airflow, consistent temperature, and quiet operation. Designed for energy efficiency and easy installation. BAYHTR Heat Kits: Provides electric heat backup for added warmth during cold months, ensuring dependable operation in low temperatures. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 4 -Ton Bundle Cooling Efficiency (SEER2) 15 Seer 2 Heat Pump Condenser Model A5HP5048 Heat Pump Condenser Stages Single Air Handler Model A5AHC006A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 36k-48k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1517BRKA Heat Kit Output 17KW AHRI 215611108 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY   PRODUCT SPECS PRODUCT MANUAL  

Read more less

The RunTru all-electric HVAC system offered by Austin HVAC, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for residential use. Designed by the trusted Trane family, this system combines advanced performance and affordability to maintain year-round indoor climate control. With heating, cooling, and supplemental electric heat, it s ideal for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Provides efficient heating and cooling, ensuring year-round comfort with reliable heat transfer in varying weather. Built to withstand harsh elements. A5AHC Air Handler: Features a multi-speed blower for enhanced airflow, consistent temperature control, quiet performance, energy efficiency, and easy installation. BAYHTR Heat Kits: Electric heat backup for extra warmth during cold months, ensuring dependable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full setup start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Heat Pump Condenser Model A5HP4060 Heat Pump Condenser Stages Single Air Handler Model A5AHC007A1D30A Air Handler Stages Single Air Handler Capacity (BTU) 42k-60k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1517BRK Heat Kit Output 17KW AHRI 215611054 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a superior condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS5B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology. Durable and quiet for reliable performance in any weather. AMST Air Handler: Optimized for superior airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and long-term reliability. HKTS Heat Kit: Provides supplemental electric heating for reliable warmth in colder months, ensuring year-round comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Long-lasting Construction: Built for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful home environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman to keep your home comfortable year-round.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLZS5BA3010 Condenser Stages Single Air Handler Model AMST30BU1300 Air Handler Cabinet Size B Heat Source Electric Heat Kit Model HKTSD10X1 AHRI Number 215381161 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less