Heat Pump Condensers

56 products

  • Goodman - 17.2 SEER2 - 3-Ton - Two-Stage Heat Pump System with 42K Variable-Speed Air Handler With Install

    Goodman Goodman - 17.2 SEER2 - 3-Ton - Two-Stage Heat Pump System with 42K Variable-Speed Air Handler With Install

    Goodman GLZT7C Heat Pump Condenser offered by Austin HVAC High-Efficiency Heating & Cooling What's Included: The Goodman GLZT7C heat pump delivers 36,000 BTUs of efficient, reliable year-round performance for residential use. Its advanced two-stage design ensures consistent comfort, energy savings, and low noise levels. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Two-Stage PerformanceOperates in two stages to match load, reducing energy use during mild conditions while providing full capacity when needed. (Up to 17.5 SEER2 / 8.2 HSPF2) Two-Stage Copeland® UltraTech Scroll Compressor Ensures dependable, quieter operation by adapting cycling to demand. Defrost Mode Optimization Features time-delay defrost control to efficiently manage ice buildup, reducing unnecessary defrost cycles and improving winter heating efficiency. Why Choose the Goodman GLZT7C? The Goodman GLZT7C Heat Pump Condenser from Austin HVAC offers versatile, resources-efficient comfort year-round. It provides reliable cooling and heating and pairs effectively with Goodman air handlers or furnaces for improved fuel savings and indoor comfort.   Condenser Model GLZT7CA3610 Size/Tonnage 3-Ton Cooling Efficiency (SEER2) 17.2 Stages Two Refrigerant R-32 Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser LIMITED WARRANTY PRODUCT SPECS

    $7,078.73

  • Trane - 2-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 2-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 24,000 BTUs (2 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, engineered to perform in all seasons and endure tough outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation and dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in harsh environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending the unit s lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump balances performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it creates a seamless system to maximize indoor comfort and energy savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, stable comfort year after year, backed by a trusted HVAC brand.   Condenser Model 5TWR4024A1000A Size/Tonnage 2-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,091.12

  • RunTru - 4-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    RunTru RunTru - 4-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    RunTru A5HP50 Heat Pump Reliable, Energy-Streamlined Comfort Year-Round What's Included: The RunTru A5HP50 heat pump condenser offered by Austin HVAC delivers 48,000 BTUs of reliable, energy-efficient heating and cooling for year-round residential comfort. Built by the Trane family, this system combines proven engineering, durable construction, and quiet operation for long-lasting performance. Designed to balance affordability and reliability, the A5HP50 ensures efficient comfort without compromise. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features All-Season PerformanceProvides heating and cooling in one efficient system to keep your home comfortable year-round. Energy-Efficient DesignEngineered for cost-effective operation to reduce energy use and lower utility bills. Robust ConstructionBuilt with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet OperationIncludes sound-reducing elements for smooth, quiet performance indoors and outdoors. Compact, Flexible InstallationFeatures a space-saving footprint, ideal for various residential setups. Why Choose the RunTru A5HP50 offered by Austin HVAC? The RunTru A5HP50 is a dependable, budget-friendly choice backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it creates a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane for comfort you can trust season after season. Condenser Model A5HP5048A1000A Cooling Capacity 4 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,259.35

  • Trane - 2.5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 2.5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 30,000 BTUs (2.5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable convenience and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation and dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in tough environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending the unit s lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump suits homeowners seeking a balance of performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it forms a seamless system to maximize indoor comfort and fuel savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, reliable comfort year after year, backed by a trusted HVAC brand.   Condenser Model 5TWR4030A1000A Size/Tonnage 2.5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Electricity GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,261.55

  • Trane - 1.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 1.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 18,000 BTUs (1.5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable ease and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationDelivers consistent heating and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorIncludes Trane s proven Climatuff® single-stage compressor, known for quiet, stable, and long-lasting performance. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingProvides steady, reliable temperature control for year-round comfort. Sleek, Compact DesignOptimized for residential spaces with a small footprint and enhanced airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a dependable, energy-productive heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5018A1000A Cooling Capacity 1.5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,428.14

  • Trane - 3-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 3-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Optimized, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 36,000 BTUs (3 tons) of durable, high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation to ensure dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in tough environments. Single-Stage Performance: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending the unit s lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump suits homeowners seeking a balance of performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it forms a seamless system to maximize indoor comfort and power savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, reliable comfort backed by a trusted HVAC brand. Condenser Model 5TWR4036A1000A Size/Tonnage 3-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,430.08

  • Goodman - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Goodman Goodman - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Goodman GLZS5BA Heat Pump offered by Austin HVAC Efficient and Reliable Year-Round Comfort What's Included: The Goodman GLZS5BA Heat Pump offered by Austin HVAC delivers 60,000 BTUs of energy-streamlined heating and cooling for residential use. Built with Goodman s proven engineering and durable construction, it ensures consistent comfort, quiet operation, and long-term reliability year-round. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM elements warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient PerformanceProvides reliable heating and cooling with high-efficiency operation to reduce energy use and lower utility bills. Proven Scroll CompressorIncludes a high-efficiency single-stage scroll compressor for dependable operation, consistent temperature control, and long care life. All-Aluminum CoilFeatures an all-aluminum refrigerant coil that improves heat transfer and resists corrosion for lasting performance. Quiet OperationDesigned with precision fan engineering to minimize noise for a comfortable home environment. Durable ConstructionHoused in a heavy-gauge galvanized steel cabinet with a baked-on powder-coat finish to resist rust and withstand outdoor conditions. Why Choose the Goodman GLZS5BA offered by Austin HVAC? The GLZS5BA is a versatile, energy-effective heat pump condenser providing reliable heating and cooling year-round. Paired with a compatible Goodman air handler, it creates a complete HVAC system that enhances performance and indoor comfort. Trust Goodman for efficient, durable, and dependable comfort with the GLZS5BA heat pump an excellent choice for all-season climate control. Condenser Model GLZS5BA6010 Size/Tonnage 5-Ton Cooling Efficiency (SEER2) 15.2 Stages Single Refrigerant R-32 Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser INSTALLATION GUIDE LIMITED WARRANTY PRODUCT SPECS  

    $7,638.98

  • Trane - 3.5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 3.5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Satisfaction What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 42,000 BTUs (3.5 tons) of efficient heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation and dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in tough environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending unit lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump offers a balance of performance, efficiency, and durability. When paired with a compatible Trane air handler or furnace, it creates a seamless system to maximize indoor ease and power savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, reliable comfort year after year, backed by a trusted HVAC brand.   Condenser Model 5TWR4042A1000A Size/Tonnage 3.5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,659.87

  • RunTru - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump - A5HP5060A1000

    RunTru RunTru - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump - A5HP5060A1000

    What's Include: The RunTru A5HP5060 Heat Pump offered by Austin HVAC delivers 60,000 BTUs (5 Ton) of energy-efficient heating and cooling for residential use. Built with RunTru's proven engineering and durable construction, it ensures consistent comfort, quiet operation, and long-term reliability year-round. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: All-Season Performance: Provides heating and cooling in one efficient system to keep your home comfortable year-round. Energy-Efficient Design: Engineered to reduce energy use and lower monthly utility bills. Durable Construction: Built with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet Performance: Includes sound-reducing components for smooth, quiet performance indoors and outdoors. Compact, Flexible Installation: Features a space-saving footprint, ideal for various residential setups. Paired with a compatible RunTru air handler, the A5HP5060 creates a complete, energy-efficient HVAC configuration built for reliability and year-round comfort. Condenser Model A5HP5060 Size/Tonnage 5-Ton Cooling Efficiency (SEER2) 15 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

    $7,784.32

  • RunTru - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    RunTru RunTru - 5-Ton - 15.2 SEER2 - Single-Stage - Heat Pump Condenser With Install

    RunTru A5HP50 Heat Pump Reliable, Energy-Efficient Comfort Year-Round What's Included: The RunTru A5HP50 heat pump condenser from Austin HVAC delivers 60,000 BTUs of reliable, energy-efficient heating and cooling for year-round residential comfort. Built by the Trane family, this system combines proven engineering, durable construction, and quiet operation for long-lasting performance. Designed for affordability and reliability, the A5HP50 ensures efficient comfort without compromise. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the typical disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features All-Season PerformanceProvides heating and cooling in one efficient system to keep your residence comfortable year-round. Energy-Efficient DesignEngineered to reduce energy use and lower monthly utility bills. Durable ConstructionBuilt with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet OperationIncludes sound-reducing components for smoother, quieter operation indoors and outdoors. Compact, Flexible InstallationFeatures a space-saving footprint, ideal for various residential setups. Why Choose the RunTru A5HP50 offered by Austin HVAC? The RunTru A5HP50 is a dependable, budget-friendly choice backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it creates a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane for comfort you can trust season after season. Condenser Model A5HP5060A1000A Cooling Capacity 5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,784.32

  • Trane - 2-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 2-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 24,000 BTUs (2 tons) of high-efficiency heating and cooling for residential use. Built with Trane s commitment to quality, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent heating and cooling while reducing electricity use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable performance and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Thermal and CoolingMaintains steady, dependable temperature control for satisfaction in every season. Sleek, Compact DesignOptimized for residential spaces with a space-saving footprint and improved airflow. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a reliable, energy-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5024A1000A Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,803.47

  • Trane - 4-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 4-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 48,000 BTUs (4 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering energy bills without sacrificing comfort. Durable Climatuff® Compressor: Built for long-lasting, quiet operation, ensuring dependable year-round performance. All-Aluminum Spine Fin Coil: Resists corrosion for lasting efficiency and durability in tough environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending unit lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump suits homeowners seeking a balance of performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it creates a seamless equipment to maximize well-being and energy savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, reliable comfort backed by a trusted HVAC brand.   Condenser Model 5TWR4048A1000A Size/Tonnage 4-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $7,881.99

© 2026 Austin HVAC, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account