Heat Pump (Backup 1743626253)

56 products

  • RunTru 3-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4036A1000

    RunTru RunTru 3-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4036A1000

    RunTru A5HP40 Heat Pump Reliable, Energy-Efficient Comfort Year-Round What's Included: The RunTru A5HP40 heat pump condenser offered by Austin HVAC delivers 36,000 BTUs of reliable, energy-efficient heating and cooling for year-round residential comfort. Built by the Trane family, this system combines proven engineering, durable construction, and quiet operation for long-lasting effectiveness. Built to balance affordability and reliability, the A5HP40 ensures efficient comfort without compromise. Professional Installation Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page Key Provides All-Season PerformanceProvides heating and cooling in one efficient system to keep your home comfortable year-round. Energy-Efficient DesignEngineered to reduce energy use and lower monthly utility bills. Durable ConstructionBuilt with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet OperationIncludes sound-reducing components for smooth, quiet performance indoors and outdoors. Compact, Flexible InstallationFeatures a space-saving footprint, ideal for various residential setups. Why Choose the RunTru A5HP40 offered by Austin HVAC? The RunTru A5HP40 is a dependable, budget-friendly choice backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it creates a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane to deliver trusted comfort season after season. Condenser Model A5HP4036A1000A Cooling Capacity 3 Ton Cooling Efficiency (SEER2) 14.3 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $4,263.48

  • RunTru 2.5-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4030A1000

    RunTru RunTru 2.5-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4030A1000

    RunTru A5HP40 Heat Pump Reliable, Energy-Efficient Comfort Year-Round What's Included: The RunTru A5HP40 heat pump condenser from Austin HVAC delivers 30,000 BTUs of dependable, energy-efficient heating and cooling for year-round residential comfort. Built by the Trane family, it combines proven engineering, durable construction, and quiet operation for long-lasting performance. Designed to balance affordability and reliability, the A5HP40 ensures efficient comfort without compromise. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features All-Season PerformanceProvides heating and cooling in one efficient system to keep your house comfortable year-round. Energy-Efficient DesignEngineered to reduce energy use and lower monthly utility bills. Durable ConstructionBuilt with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet OperationIncludes sound-reducing components for smooth, quiet performance indoors and outdoors. Compact, Flexible InstallationFeatures a space-saving footprint, ideal for various residential setups. Why Choose the RunTru A5HP40 offered by Austin HVAC? The RunTru A5HP40 is a dependable, budget-friendly choice backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it creates a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane for trusted comfort season after season. Condenser Model A5HP4030A1000A Cooling Capacity 2.5 Ton Cooling Efficiency (SEER2) 14.3 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS  

    $4,159.90

  • RunTru 2-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4024A1000

    RunTru RunTru 2-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4024A1000

    RunTru A5HP40 Heat Pump Reliable, Energy-Efficient Comfort Year-Round What's Included: The RunTru A5HP40 heat pump condenser offered by Austin HVAC delivers 24,000 BTUs of reliable, energy-efficient heating and cooling for year-round residential comfort. Built by the Trane family, this system combines proven engineering, durable construction, and quiet operation for long-lasting performance. Designed to balance affordability and reliability, the A5HP40 ensures efficient comfort without compromise. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features All-Season Performance Provides heating and cooling in one efficient system to keep your home comfortable year-round. Energy-Optimized Design Engineered for cost-effective operation to reduce electricity use and lower utility bills. Durable Construction Built with high-quality materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet Operation Features sound-reducing components for smooth, quiet performance indoors and outdoors. Compact, Flexible Installation Has a space-saving footprint, ideal for various residential installation setups. Why Choose the RunTru A5HP40 offered by Austin HVAC? The RunTru A5HP40 is a solid choice for homeowners seeking dependable, budget-friendly comfort from a brand backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it creates a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane to deliver trusted comfort season after season. Condenser Model A5HP4024A1000A Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 14.3 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $4,056.33

  • RunTru 1.5-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4018A1000

    RunTru RunTru 1.5-Ton 14.3 SEER2 Heat Pump - Single-Stage A5HP4018A1000

    RunTru A5HP40 Heat Pump Reliable, Energy-Efficient Comfort Year-Round What's Included: The RunTru A5HP40 heat pump condenser offered by Austin HVAC delivers 18,000 BTUs of effective warming and cooling for year-round residential comfort. Built by the Trane family, this system combines proven engineering, durable construction, and quiet operation for long-lasting performance. Designed to balance affordability and reliability, the A5HP40 ensures efficient comfort without compromise. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features All-Season PerformanceProvides heating and cooling in one efficient system to keep your home comfortable year-round. Energy-Efficient DesignEngineered for cost-effective operation to reduce energy use and lower utility bills. Durable ConstructionBuilt with superior materials and a galvanized steel cabinet to resist rust, corrosion, and harsh outdoor conditions. Quiet OperationIncludes sound-reducing components for smooth, quiet performance indoors and outdoors. Compact, Flexible InstallationFeatures a space-saving footprint, ideal for various residential installation setups. Why Choose the RunTru A5HP40 offered by Austin HVAC? The RunTru A5HP40 is a reliable, budget-friendly choice backed by Trane s trusted legacy. Paired with a compatible RunTru air handler, it forms a complete, energy-efficient HVAC system built for reliability and long-term savings. Count on RunTru by Trane to deliver proven comfort season after season. Condenser Model A5HP4018A1000A Cooling Capacity 1.5 Ton Cooling Efficiency (SEER2) 14.3 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS  

    $3,959.90

  • Trane - 5 Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 5 Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Trustworthy Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 60,000 BTUs (5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s commitment to quality, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full setup start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides reliable heating and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable performance and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingMaintains steady, dependable temperature control for comfort all year. Sleek, Compact DesignOptimized for residential spaces with a space-saving footprint and improved airflow. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a consistent, fuel-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system for maximum comfort, efficiency, and reliability.   Condenser Model 5TWR5060A1000A Cooling Capacity 5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,897.76

  • Trane - 4-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 4-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 48,000 BTUs (4 tons) of durable, high-efficiency heating and cooling for residential use. Built with Trane s high-grade standards, this unit ensures reliable comfort and energy savings designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent temperature and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable operation and long life. Corrosion-Resistant CoilBuilt to resist harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingMaintains steady, dependable temperature control for comfort in all seasons. Sleek, Compact DesignOptimized for residential spaces with a small footprint and improved airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a reliable, energy-efficient heat pump that delivers strong heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5048A1000A Cooling Capacity 4 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,498.75

  • Trane - 3.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 3.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 42,000 BTUs (3.5 tons) of durable, high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and conventional installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent heating and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable effectiveness and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingMaintains steady, reliable temperature control for comfort in all seasons. Sleek, Compact DesignOptimized for residential spaces with a small footprint and improved airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a dependable, energy-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5042A1000A Cooling Capacity 3.5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,301.06

  • Trane - 3-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 3-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 36,000 BTUs (3 tons) of durable, high-efficiency heating and cooling for residential use. Built with Trane s commitment to excellent, this unit ensures reliable comfort and energy savings designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent heating and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable operation and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingMaintains steady, dependable temperature control for year-round comfort. Sleek, Compact DesignOptimized for residential spaces with a small footprint and improved airflow for better functionality. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a dependable, energy-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5036A1000A Cooling Capacity 3 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS    

    $7,094.25

  • Trane - 2.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 2.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 30,000 BTUs (2.5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationDelivers consistent heating and cooling while reducing fuel use and lowering utility bills. Durable Climatuff® CompressorIncludes Trane s proven Climatuff® single-stage compressor for quiet, reliable, and long-lasting effectiveness. Corrosion-Resistant CoilBuilt to resist harsh weather and environmental damage for years of efficient support. Single-Stage Heating and CoolingProvides steady, reliable temperature control for comfort in every season. Sleek, Compact DesignDesigned for residential spaces with a small footprint and improved airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a dependable, energy-efficient heat pump that delivers powerful heating and cooling year-round. When paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5030A1000A Cooling Capacity 2.5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $6,925.85

  • Trane - 2-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 2-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 24,000 BTUs (2 tons) of high-efficiency heating and cooling for residential use. Built with Trane s commitment to quality, this unit ensures reliable comfort and energy savings, designed to perform year-round and withstand harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationProvides consistent heating and cooling while reducing electricity use and lowering utility bills. Durable Climatuff® CompressorFeatures Trane s proven Climatuff® single-stage compressor, known for quiet, reliable performance and long life. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Thermal and CoolingMaintains steady, dependable temperature control for satisfaction in every season. Sleek, Compact DesignOptimized for residential spaces with a space-saving footprint and improved airflow. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a reliable, energy-efficient heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5024A1000A Cooling Capacity 2 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $6,762.93

  • Trane - 1.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 1.5-Ton - 15.2 SEER - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR50 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR50 Heat Pump offered by Austin HVAC delivers 18,000 BTUs (1.5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s quality standards, this unit ensures reliable ease and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient OperationDelivers consistent heating and cooling while reducing energy use and lowering utility bills. Durable Climatuff® CompressorIncludes Trane s proven Climatuff® single-stage compressor, known for quiet, stable, and long-lasting performance. Corrosion-Resistant CoilBuilt to withstand harsh weather and environmental elements for lasting efficiency. Single-Stage Heating and CoolingProvides steady, reliable temperature control for year-round comfort. Sleek, Compact DesignOptimized for residential spaces with a small footprint and enhanced airflow for better performance. Why Choose the Trane 5TWR50 offered by Austin HVAC? The Trane 5TWR50 offered by Austin HVAC is ideal for homeowners seeking a dependable, energy-productive heat pump that delivers powerful heating and cooling year-round. Paired with a compatible Trane air handler or furnace, it creates a complete HVAC system optimized for comfort, efficiency, and reliability.   Condenser Model 5TWR5018A1000A Cooling Capacity 1.5 Ton Cooling Efficiency (SEER2) 15.2 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $6,433.48

  • Trane - 5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane Trane - 5-Ton - 14.3 SEER2 - Single-Stage - Heat Pump Condenser With Install

    Trane 5TWR40 Heat Pump offered by Austin HVAC Efficient, Reliable Year-Round Comfort What's Included: The Trane 5TWR40 Heat Pump offered by Austin HVAC delivers 60,000 BTUs (5 tons) of high-efficiency heating and cooling for residential use. Built with Trane s premium standards, this unit ensures reliable comfort and energy savings, designed to perform year-round and endure harsh outdoor conditions. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Operation: Optimized for cost-effective heating and cooling, lowering fuel bills without sacrificing satisfaction. Durable Climatuff® Compressor: Built for long-lasting, quiet operation and dependable year-round performance. All-Aluminum Spine Fin Coil: Corrosion-resistant for lasting efficiency and durability in tough environments. Single-Stage Operation: Provides steady, reliable temperature control for optimal comfort. WeatherGuard Top: Shields components from weather, extending unit lifespan. Why Choose the Trane 5TWR40 offered by Austin HVAC? This heat pump balances performance, efficiency, and durability. Paired with a compatible Trane air handler or furnace, it creates a seamless system to maximize indoor comfort and energy savings. Trust the Trane 5TWR40 Heat Pump offered by Austin HVAC for consistent, trustworthy comfort backed by a established HVAC brand.   Condenser Model 5TWR4060A1000A Size/Tonnage 5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS

    $6,876.42

© 2026 Austin HVAC, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account