The Goodman HVAC system combines an energy-efficient condenser, a trustworthy gas furnace, and a high-performance evaporator coil to provide consistent thermal and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Built for reliable performance and comfort in cold weather. Goodman CHPTA Evaporator Coil: All-aluminum coil designed for horizontal use, with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Constructed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-streamlined cooling, reliable heating, and advanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment.   Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA6010 Condenser Stages Single Furnace Model GR9S800805CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA6030D3 Coil Cabinet Size C AHRI 214860184 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a superior condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS5B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology. Durable and quiet for reliable performance in any weather. AMST Air Handler: Optimized for superior airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and long-term reliability. HKTS Heat Kit: Provides supplemental electric heating for reliable warmth in colder months, ensuring year-round comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Long-lasting Construction: Built for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful home environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman to keep your home comfortable year-round.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLZS5BA3010 Condenser Stages Single Air Handler Model AMST30BU1300 Air Handler Cabinet Size B Heat Source Electric Heat Kit Model HKTSD10X1 AHRI Number 215381161 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less

The Goodman HVAC setup offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent warming and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, delivering reliable, energy-conscious heating for homes. The Goodman CAPTA evaporator coil: Designed for vertical use, this all-aluminum coil resists corrosion. Its insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a unified heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA3626C3 Coil Cabinet Size C AHRI 215214817 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide reliable heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower for precise temperature control and energy efficiency. Durable, quiet, and flexible for reliable home heating year-round. The Goodman CAPTA evaporator coil: Designed for vertical use with all-aluminum construction to resist corrosion. Its insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built for reliable operation and long system life with Goodman s quality standards. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Easy to install and integrate for a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort by combining energy-streamlined cooling, reliable heating, and enhanced heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA3626C3 Coil Cabinet Size C AHRI 216614739 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Built for durability and optimized comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5B: A single-stage, R-32 refrigerant air conditioner with a robust Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Its sturdy build ensures comfort on cold days. Goodman CHPTA Evaporator Coil: Designed for horizontal use, this all-aluminum coil offers efficient performance with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. System Benefits: Energy Efficiency: Lowers power use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy fitting and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLXS5BA3610 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA3630C3 Coil Cabinet Size C AHRI 215380772 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY

Read more less

The Goodman HVAC system combines an energy-efficient condenser, a trustworthy gas furnace, and a high-performance evaporator coil to provide stable heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Built for reliable performance and comfort on cold days. The Goodman CAPTA evaporator coil: Designed for vertical applications with all-aluminum construction to resist corrosion. Its insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round convenience. Combining energy-efficient cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 214860131 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, reliable gas furnace, and high-performance evaporator coil to deliver consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential installations. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower for precise temperature control and improved energy efficiency. Durable, quiet, and flexible for reliable dwelling heating year-round. Goodman CHPTA Evaporator Coil: All-aluminum, horizontal coil with an insulated, compact cabinet to reduce energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers power use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-effective cooling, reliable heating, and enhanced heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3610 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 214859688 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a high-operation heat pump condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS4B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology. Durable and quiet for reliable performance in any weather. AMST Air Handler: Optimized for superior airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and long-term reliability. HKTS Heat Kit: Supplemental electric heat for reliable warmth in colder months, ensuring year-round convenience. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Durable Construction: Built for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful home environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman to keep your home comfortable year-round.   Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLZS4BA4210 Condenser Stages Single Air Handler Model AMST42CU1300 Air Handler Cabinet Size C Heat Source Electric Heat Kit Model HKTSD15XB AHRI Number 215213860 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an resources-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to deliver consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures reliable indoor climate control year-round. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, providing reliable, energy-conscious heating for homes. Goodman CHPTA Evaporator Coil: All-aluminum coil for horizontal applications, featuring an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s superior standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman unit offers a dependable, cost-effective way to maintain year-round convenience. Combining energy-efficient cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3610 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 214859782 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

Goodman GLZT7C Heat Pump Condenser offered by Austin HVAC High-Efficiency Heating & Cooling What's Included: The Goodman GLZT7C heat pump delivers 60,000 BTUs of efficient, reliable year-round performance for residential use. Its advanced two-stage design ensures consistent comfort, electricity savings, and low noise levels. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation: Removal & haul-off of existing equipment Mounting of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit: Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Productive Two-Stage PerformanceOperates in two stages to closely match load, reducing energy use during mild conditions while providing full capacity when needed. (Up to 17.5 SEER2 / 8.2 HSPF2) Two-Stage Copeland® UltraTech Scroll Compressor Provides dependable, quieter operation by adapting cycling to demand. Defrost Mode Optimization Features time-delay defrost control that efficiently manages ice buildup, reducing unnecessary defrost cycles and improving winter heating efficiency. Why Choose the Goodman GLZT7C? The Goodman GLZT7C Heat Pump Condenser from Austin HVAC offers versatile, energy-efficient comfort year-round. It provides reliable cooling and heating and pairs well with Goodman air handlers or furnaces for an effective, energy-saving system. Condenser Model GLZT7CA6010 Size/Tonnage 5-Ton Cooling Efficiency (SEER2) 17.2 Stages Two Refrigerant R-32 Application Heat Pump Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser LIMITED WARRANTY PRODUCT SPECS

Read more less

The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent temperature and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Built for reliable performance and comfort on cold days. Goodman CHPTA Evaporator Coil: Designed for horizontal use, this all-aluminum coil offers durable, efficient performance with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s quality standards for reliable operation and long system life. Quiet Performance: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-efficient cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860130 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY <

Read more less

Discover balanced heating and cooling with the Goodman heat pump system offered by Austin HVAC, featuring a high-performance condenser, advanced air handler, and powerful HKTS heat kit. Designed for small to medium homes, it delivers energy-efficient comfort year-round. What's Included: GLZS5B Heat Pump Condenser: Efficient heating and cooling with advanced compressor technology, built for durability and quiet operation. AMST Air Handler: Optimized for airflow and energy efficiency, with an all-aluminum coil for corrosion resistance and reliability. HKTS Heat Kit: Provides supplemental electric heating for reliable warmth in colder months. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy costs while maintaining precise indoor temperatures. Durable Construction: Engineered for long-lasting performance and reliability. Quiet Operation: Minimizes noise for a peaceful house environment. Smart Compatibility: Integrates seamlessly with smart thermostats and zoning systems for enhanced control. This Goodman heat pump system combines efficiency, reliability, and advanced climate control. Whether upgrading or installing new HVAC, trust Goodman for year-round comfort.   Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLZS5BA2410 Condenser Stages Single Air Handler Model AMST24BU1300 Air Handler Cabinet Size B Heat Source Electric Heat Kit Model HKTSD08X1 AHRI Number 215381160 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS  

Read more less