Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-conscious operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215581800 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a reliable, energy-optimized solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Manufactured by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort throughout the year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and improved air circulation in colder seasons. 5TXC Coil: Enhances heat transfer for heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5018 Condenser Stages Single Furnace Model A801X040BM2SDA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479462 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products supply quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while minimizing energy costs. A801X Furnace: Delivers consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in cold seasons. 5TXC Coil: Enhances heat transfer in warming and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4024 Condenser Stages Single Furnace Model A801X040BM2SDA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215559512 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS  

Read more less

Lennox is a trusted leader in dwelling comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Centered on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, fuel-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower resources use, and quiet operation in a compact design. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, built for durability and corrosion resistance, pairing well with Lennox air conditioners and heat pumps for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-042 Condenser Stages Single Furnace Model ML196UH090XE48C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-48C Coil Cabinet Size C AHRI 215583976 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GLXT7C: a two-stage, high-efficiency air conditioner with up to 17.2 SEER2 performance, featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Designed for durability and advanced diagnostics, it offers enhanced comfort and energy savings. GMVC80 Gas Furnace: is a two-stage, variable-speed gas furnace with up to 80% AFUE efficiency, featuring an advanced variable-speed blower motor for quiet, consistent airflow and dependable heating performance. The Goodman CAPTA evaporator coil: designed for vertical applications, it offers durable, efficient performance with all-aluminum construction that resists corrosion. The insulated, compact cabinet reduces energy loss and noise, ideal for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.2 Seer2 Condenser Model GLXT7CA2410A Condenser Stages Variable Speed Furnace Model GMVC800603BNA Furnace Stages Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA2422B3 Coil Cabinet Size B AHRI 215865656 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GLXT7C: a two-stage, high-efficiency air conditioner with up to 17.2 SEER2 performance, featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Designed for durability and advanced diagnostics, it offers enhanced comfort and energy savings. GMVC80 Gas Furnace: is a two-stage, variable-speed gas furnace with up to 80% AFUE efficiency, featuring an advanced variable-speed blower motor for quiet, consistent airflow and dependable heating performance. The Goodman CHPTA evaporator coil: a cased horizontal coil with a factory-installed TXV, offering durable, efficient performance for horizontal installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.2 Seer2 Condenser Model GLXT7CA2410A Condenser Stages Variable Speed Furnace Model GMVC800603BNA Furnace Stages Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 215865709 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GSXS6S is a two-stage air conditioner rated up to 17.2 SEER2, featuring a variable-speed swing compressor, a quiet digitally commutated fan motor, and a high-density compressor sound blanket for reliable, low-noise cooling. GMVC80 Gas Furnace: is a two-stage, variable-speed gas furnace with up to 80% AFUE efficiency, featuring an advanced variable-speed blower motor for quiet, consistent airflow and dependable heating performance. The Goodman CHPE evaporator coil: a cased horizontal coil with all-aluminum construction, built for efficient, corrosion-resistant performance in horizontal installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17 Seer2 Condenser Model GSXS6S2410A Condenser Stages Variable Speed Furnace Model GMVC800603BNA Furnace Stages Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPE3636B4 Coil Cabinet Size B AHRI 213349283 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GSXS6S is a two-stage air conditioner rated up to 17.2 SEER2, featuring a variable-speed swing compressor, a quiet digitally commutated fan motor, and a high-density compressor sound blanket for reliable, low-noise cooling. GMVC80 Gas Furnace: is a two-stage, variable-speed gas furnace with up to 80% AFUE efficiency, featuring an advanced variable-speed blower motor for quiet, consistent airflow and dependable heating performance. The Goodman CAPEA evaporator coil: a cased upflow/downflow coil with a factory-installed EEV and all-aluminum construction, engineered for corrosion resistance and efficient heat transfer in vertical installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 17.2 Seer2 Condenser Model GSXS6S1810A Condenser Stages Variable Speed Furnace Model GMVC800603BNA Furnace Stages Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CAPEA2422B4B Coil Cabinet Size B AHRI 214470876 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-optimized condenser, a reliable gas furnace, and a high-performance evaporator coil to provide stable heating and cooling for small to medium homes. Built for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, efficient heating. Its sturdy build ensures dependable comfort in cold weather. Goodman CHPTA Evaporator Coil: A horizontal, all-aluminum coil with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC deployment by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. System Benefits: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort by combining energy-efficient cooling, reliable heating, and efficient heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 15 Seer2 Condenser Model GLXS5BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 215381044 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your house comfortable year-round. What's Included: ML17KC2 Condenser: The Lennox ML17KC2 is a high-efficiency, 17 SEER2, two-stage air conditioner condenser delivering consistent cooling, quieter operation, and improved humidity control. Its durable cabinet and advanced compressor ensure reliable performance and resources savings. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing steady airflow, better temperature control, and quieter operation for enhanced convenience. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting functionality. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3 -Ton Bundle Cooling Efficiency (SEER2) 17 Condenser Model ML17KC2-036 Condenser Stages Two Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-36B Coil Cabinet Size B AHRI 217317863 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The Goodman HVAC system combines an energy-streamlined condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower for precise temperature control and energy efficiency. Durable, quiet, and flexible for reliable residence heating year-round. Goodman CHPTA Evaporator Coil: All-aluminum coil for horizontal use, offering efficient performance with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Resources Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860050 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, delivering reliable, energy-conscious heating for homes. Goodman CHPTA Evaporator Coil: All-aluminum coil for horizontal use, featuring an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Long-lasting Performance: Built to Goodman s quality standards for reliable operation and long setup life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort by combining resources-efficient cooling, reliable heating, and enhanced heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860102 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMIT

Read more less