The Goodman HVAC system offered by Austin HVAC combines an energy-productive condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Built for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Its sturdy build ensures reliable comfort in cold weather. The Goodman CAPTA evaporator coil: Designed for vertical use, with all-aluminum construction to resist corrosion. The insulated, compact cabinet reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built to Goodman s quality standards for reliable operation and long setup life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort. The condenser, furnace, and coil work together to deliver energy-efficient cooling, reliable heating, and improved heat transfer for an ideal indoor environment.   Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214860003 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-functionality evaporator coil to provide consistent heating and cooling for small to medium homes. Built for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. Goodman GR9S96 gas furnace: A high-efficiency, single-stage furnace with up to 96% AFUE, delivering reliable, energy-conscious heating for homes. Goodman CHPTA Evaporator Coil: All-aluminum coil for horizontal use, featuring an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs while maintaining comfort. Durable Efficiency: Built to Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration for complete home heating and cooling. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-productive cooling, reliable heating, and enhanced heat transfer. The Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215214853 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

The RunTru gas HVAC setup offered by Austin HVAC is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver superior, durability, and performance to maintain indoor comfort all year. What's Included: A5AC50 Condenser: A durable, energy-efficient air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5024 Condenser Stages Single Furnace Model A801X040BM2SDA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215479670 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The Goodman HVAC system offered by Austin HVAC combines an power-efficient condenser, reliable gas furnace, and high-performance evaporator coil to deliver consistent heating and cooling for small to medium homes. Engineered for durability and ease, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GRVT80 Gas Furnace: Features a two-stage gas valve and variable-speed blower for precise temperature control and improved energy efficiency. Durable, quiet, and flexible for reliable home heating year-round. Goodman CHPTA Evaporator Coil:All-aluminum coil constructed for horizontal use, with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Sturdy Performance: Built with Goodman s quality standards for reliable operation and long lifespan. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort by combining energy-efficient cooling, reliable heating, and enhanced heat transfer. The condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stages Two Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 216613485 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY  

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, better temperature control, and quieter operation for improved comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for consistent, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM units warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-30B Coil Cabinet Size B AHRI 215581492 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

Lennox is a trusted leader in home comfort, delivering high-functionality HVAC systems that combine efficiency, reliability, and innovation. Concentrated on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for dependable, energy-efficient cooling. Built with a long-lasting cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-conscious operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070E36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-42B Coil Cabinet Size B AHRI 215583015 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a dependable, energy-efficient solution for year-round comfort. Designed for residential use, it combines streamlined cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver excellent, durability, and performance to maintain indoor comfort throughout the year. What's Included: A5AC40 Condenser: A durable, energy-productive air conditioner that keeps your home cool during summer while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5AC4042 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215559954 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver high-grade, durability, and performance to maintain indoor convenience all year. What's Included: A5AC50 Condenser: A durable, energy-productive air conditioner that keeps your house cool while minimizing energy costs. A801X Furnace: Delivers consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in colder seasons. 5TXC Coil: Enhances heat transfer in heating and cooling, with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 Bundle Cooling Efficiency (SEER2) 15 Seer 2 Condenser Model A5AC5030 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215480009 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor convenience all year. What's Included: A5AC40 Condenser: A durable, energy-efficient air conditioner that keeps your home cool while lowering energy costs. A951X Furnace: Delivers consistent heating with 95% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation in cold seasons. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4018 Condenser Stages Single Furnace Model A951X040BU3SAC Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215559460 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

The Goodman HVAC system combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent temperature and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Built for reliable performance and comfort on cold days. Goodman CHPTA Evaporator Coil: Designed for horizontal use, this all-aluminum coil offers durable, efficient performance with an insulated, compact cabinet that reduces energy loss and noise, ideal for tight spaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman s quality standards for reliable operation and long system life. Quiet Performance: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-efficient cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment season after season.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860130 Refrigerant R-32 Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY <

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, improved temperature control, and quieter operation for enhanced comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Sturdy and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-30B Coil Cabinet Size B AHRI 215581887 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Built for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-optimized cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering stable airflow, improved temperature control, and quieter operation for enhanced comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-36B Coil Cabinet Size B AHRI 215582465 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less