Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for power savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your property comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, providing dependable comfort, lower energy use, and quiet operation in a compact design. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Long-lasting and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the typical disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (conventional thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-042 Condenser Stages Single Furnace Model ML196UH090XE48C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-42C Coil Cabinet Size C AHRI 215584301 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Austin, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA2410 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT960403BNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA2410 Condenser Stages Two-Stage Furnace Model GRVT960403BNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 40K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 216569679 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.What's Included: NS16A Condenser: The GE Appliances NS16A is a single-stage central air conditioner delivering 16.5 SEER2 cooling efficiency. Features a durable tube-and-fin coil for reliable heat exchange, optimized airflow design for consistent performance, and on-demand defrost protection. Uses low-GWP R-454B refrigerant. 10-year parts and compressor limited warranty when registered. NF80U070V3AR Furnace: The GE Appliances NF80U is an 80% AFUE two-stage variable-speed gas furnace adjusting heat output and fan speed to match your home's demands. Insta-Position multi-position installation, pre-formed flanges, and ECM blower deliver superior comfort. Lifetime heat exchanger warranty when registered. NCUC30AT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model NS16A24SA5 Condenser Stages Single Furnace Model NF80U070V3AR Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size A Heat Source Gas Coil Model NCUC30AT5S Coil Cabinet Size A AHRI 217495618 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on resources savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML17KC2 Condenser: The Lennox ML17KC2 is a high-efficiency, 17 SEER2, two-stage air conditioner condenser delivering consistent cooling, quieter performance, and improved humidity control. Its durable cabinet and advanced compressor ensure reliable performance and energy savings. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, better temperature control, and quieter operation for enhanced comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal use. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 3 -Ton Bundle Cooling Efficiency (SEER2) 17 Condenser Model ML17KC2-036 Condenser Stages Two Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-42B Coil Cabinet Size B AHRI 217318268 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, power-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, delivering reliable performance, improved airflow, and energy-conscious execution for standard-efficiency needs. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, built for durability and corrosion resistance, pairing well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing added is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215582579 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The RunTru gas HVAC system offered by Austin HVAC is a reliable, energy-efficient solution for year-round comfort. Designed for residential use, it combines efficient cooling and dependable heating at an affordable price. Made by the trusted Trane family, RunTru products deliver quality, durability, and performance to maintain indoor comfort all year. What's Included: A5AC40 Condenser: Durable, energy-efficient air conditioning that keeps your property cool while minimizing energy costs. A801X Furnace: Provides consistent heating with 80% AFUE efficiency and a multi-speed blower for optimal warmth and air circulation. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Condenser Model A5AC4030 Condenser Stages Single Furnace Model A801X060BM4SDA Furnace Stages Single Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215559666 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SUBMITTAL PRODUCT SUBMITTAL PRODUCT SPECS    

Read more less

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.What's Included: NS16A Condenser: The GE Appliances NS16A is a single-stage central air conditioner delivering 16 SEER2 cooling efficiency. Features a durable tube-and-fin coil for reliable heat exchange, optimized airflow design for consistent performance, and on-demand defrost protection. Uses low-GWP R-454B refrigerant. 10-year parts and compressor limited warranty when registered. NF80U070V3AR Furnace: The GE Appliances NF80U is an 80% AFUE two-stage variable-speed gas furnace adjusting heat output and fan speed to match your home's demands. Insta-Position multi-position installation, pre-formed flanges, and ECM blower deliver superior comfort. Lifetime heat exchanger warranty when registered. NCHC24AT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model NS16A24SA5 Condenser Stages Single Furnace Model NF80U070V3AR Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size A Heat Source Gas Coil Model NCHC24AT5S Coil Cabinet Size A AHRI 217495635 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Austin, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA6010 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800805CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA6030D3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 15.5 SEER2 Condenser Model GLXS5BA6010 Condenser Stages Single Furnace Model GR9S800805CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA6030D3 Coil Cabinet Size D AHRI 215381128 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential thermal and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering stable airflow, improved temperature control, and quieter operation for enhanced comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for trustworthy performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH110V60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215581804 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE  

Read more less

The Goodman HVAC system offered by Austin HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Austin, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800603BN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA3626B3 Coil Cabinet Size B AHRI 216613814 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.What's Included: NS16A Condenser: The GE Appliances NS16A is a single-stage central air conditioner delivering 16 SEER2 cooling efficiency. Features a durable tube-and-fin coil for reliable heat exchange, optimized airflow design for consistent performance, and on-demand defrost protection. Uses low-GWP R-454B refrigerant. 10-year parts and compressor limited warranty when registered. NF80U070S3BR Furnace: The GE Appliances NF80U is an 80% AFUE single-stage gas furnace with Insta-Position installation flexibility for upflow or horizontal configuration. Pre-formed flanges, aluminized steel burners, and PSC blower ensure easy setup and reliable heating. Lifetime heat exchanger warranty when registered. NCHC42BT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model NS16A36SA5 Condenser Stages Single Furnace Model NF80U070S3BR Furnace Stages Single-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size B Heat Source Gas Coil Model NCHC42BT5S Coil Cabinet Size B AHRI 216724246 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

GE Appliances is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, GE Appliances products meet top residential heating and cooling standards. Whether upgrading or installing new, GE Appliances provides advanced solutions to keep your home comfortable year-round.What's Included: NS16A Condenser: The GE Appliances NS16A is a single-stage central air conditioner delivering 16 SEER2 cooling efficiency. Features a durable tube-and-fin coil for reliable heat exchange, optimized airflow design for consistent performance, and on-demand defrost protection. Uses low-GWP R-454B refrigerant. 10-year parts and compressor limited warranty when registered. NF80U070V3AR Furnace: The GE Appliances NF80U is an 80% AFUE two-stage variable-speed gas furnace adjusting heat output and fan speed to match your home's demands. Insta-Position multi-position installation, pre-formed flanges, and ECM blower deliver superior comfort. Lifetime heat exchanger warranty when registered. NCUC36AT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model NS16A30SA5 Condenser Stages Single Furnace Model NF80U070V3AR Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 70K Furnace Cabinet Size A Heat Source Gas Coil Model NCUC36AT5S Coil Cabinet Size A AHRI 217495633 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less