The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.1 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCHC42CT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 16.1 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC42CT5S Coil Cabinet Size C AHRI 216743602 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7024 Air Conditioner: The Trane 5TTR7 is a 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S9X2B040U3PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque (CTM) blower motor for efficient, dependable heating. Stainless steel primary and secondary heat exchanger, insulated cabinet, ENERGY STAR® certified. 40k output. 5TXCB003 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S9X2B040U3PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 216566639 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 17.1 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC49CT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC49CT5S Coil Cabinet Size C AHRI 216743598 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.55 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCUC60CT5S Evaporator Coil: The GE Appliances NCUC is a cased evaporator coil for upflow or downflow (vertical) applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.55 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCUC60CT5S Coil Cabinet Size C AHRI 216743610 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: Lennox EL18KCV Condenser: The Lennox EL18KCV is a 2-Ton variable-speed Elite Series air conditioner with up to 18.0 SEER2 efficiency, engineered for next-generation R-454B refrigerant. SilentComfort™ technology and an all-aluminum Quantum Coil deliver whisper-quiet operation, superior durability, and outstanding energy savings. Lennox SLP99 Furnace: The Lennox SLP99 is a 99% AFUE modulating gas furnace — among the highest residential efficiency available — featuring a fully variable gas valve and variable-speed ECM blower for near-silent operation and industry-leading annual fuel savings. Lennox CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased evaporator coil with Quantum Coil technology for superior corrosion resistance, built for upflow/downflow (vertical) installations. Engineered as a precision match for Lennox Elite Series condensers and furnaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 18.0 Condenser Model EL18KCV-024-230 Condenser Stages Variable Speed Furnace Model SLP99UHVK070XV36B Furnace Stages Variable Furnace Efficiency 99% Furnace Capacity (BTU) 70k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-30B Coil Cabinet Size B AHRI 216721671 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT EHB PRODUCT EHB PRODUCT EHB

Read more less

The GE Appliances NS18H Connect Series is a dual fuel system a variable-speed inverter heat pump paired with a high-efficiency gas furnace. The heat pump handles all cooling and mild-weather heating with industry-leading efficiency, while the gas furnace automatically takes over when temperatures drop below the heat pump's optimal range, delivering reliable, powerful heat even in freezing conditions. Dual fuel-rated, ENERGY STAR® certified, and SmartHQ connected the intelligent choice for Texas homes that demand both peak cooling efficiency and cold-snap heating backup.What's Included: NS18H60HA5 Connect Series Heat Pump: The GE Appliances NS18H Connect Series is a variable-speed inverter heat pump with a compact side-discharge cabinet (17-1/8" depth) delivering 16.5 SEER2 cooling. Rated for heating down to -22°F ENERGY STAR® certified cold-climate performance. Dual fuel-rated and compatible with 600+ AHRI-certified systems. As low as 54 dB quiet operation. R-454B low-GWP refrigerant. Built-in SmartHQ WiFi with Alexa and Google Assistant. Eligible for federal 25C tax credits. 5-year base / 10-year registered warranty. NF97U090V5C Furnace: The GE Appliances NF97U is a 97% AFUE two-stage variable-speed condensing gas furnace capturing nearly all available heat for maximum efficiency. Secondary heat exchanger, ECM variable-speed blower, PVC direct-vent, and Insta-Position flexibility for easy installation. Lifetime heat exchanger warranty when registered. NCHC51CT5S Evaporator Coil: The GE Appliances NCHC is a cased evaporator coil for horizontal attic and closet applications. Compatible with R-454B refrigerant, aluminum fin and copper tube construction provides efficient heat transfer with factory-installed TXV for precise refrigerant metering. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel System Kit (Heat Pump + Furnace + Coil) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Gas line extension, re-routing, or new gas line installation Crane or rooftop rigging for difficult equipment access Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Heat Pump Model NS18H60HA5 Heat Pump Stages Variable Speed Inverter Furnace Model NF97U090V5C Furnace Stages Two-Stage Variable-Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 90K Furnace Cabinet Size C Heat Source Dual Fuel (Heat Pump + Gas) Coil Model NCHC51CT5S Coil Cabinet Size C AHRI 216759803 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil TECHNICAL RESOURCES TECHNICAL RESOURCES TECHNICAL RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY

Read more less

Experience efficient and reliable well-being with a complete Trane Gas HVAC System from Austin HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-efficiency indoor coil, designed for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with quiet, reliable efficiency in extreme temperatures. S9V2 Gas Furnace: Offers top efficiency and ultra-quiet, precise comfort with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal heating, airflow, and energy savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5030 Condenser Stages Single+ Furnace Model S9V2B060U4VSBB Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215830755 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Austin HVAC. This system includes a powerful air conditioner, a reliable gas furnace, and a high-performance indoor coil, engineered for consistent heating and cooling, energy efficiency, and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet performance for stable performance in extreme temperatures. S8V2 Gas Furnace: Premium comfort and efficiency with a variable-speed blower motor and two-stage gas valve, ensuring consistent temperatures, quiet operation, and improved indoor air quality. Adapts to your home s needs for energy savings year-round. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and regular fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5060 Condenser Stages Single+ Furnace Model S8V2C080M5PCAA Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215477004 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane Gas HVAC System from Austin HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with sturdy, quiet operation for reliable performance in extreme temperatures. S9V2 Gas Furnace: Offers top efficiency and ultra-quiet, precise comfort with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified, maximizing airflow and energy savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and typical installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4042 Condenser Stages Single Furnace Model S9V2B060U4VSBB Furnace Stages Two Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 215830551 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience premium efficiency and reliability with a complete Trane 5TTR7 Gas HVAC System from Austin HVAC. This system pairs a high-efficiency multi-speed air conditioner with a proven Trane gas furnace and matched evaporator coil — built for year-round comfort in Austin's climate. What's Included: 5TTR7036 Air Conditioner: The Trane 5TTR7 is a 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with an inverter-driven compressor. Durable louvered steel cabinet, R-454B refrigerant, with a 10-year parts and compressor limited warranty when registered. S8V2B060M4PCB Furnace: The Trane S8V2 is an 80% AFUE two-stage variable-speed gas furnace with a variable-speed ECM blower motor and multi-port in-shot burners for efficient, quiet heating. Tubular steel heat exchanger, insulated cabinet. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil is a multi-position cased evaporator coil engineered for Cabinet B systems. Compatible with R-454B refrigerant, factory-installed TXV for precise refrigerant metering, and corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8V2B060M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567517 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: Lennox EL18KCV Condenser: The Lennox EL18KCV is a 2-Ton variable-speed Elite Series air conditioner with up to 18.5 SEER2 efficiency, engineered for next-generation R-454B refrigerant. SilentComfort™ technology and an all-aluminum Quantum Coil deliver whisper-quiet operation, superior durability, and outstanding energy savings. Lennox SLP99 Furnace: The Lennox SLP99 is a 99% AFUE modulating gas furnace — among the highest residential efficiency available — featuring a fully variable gas valve and variable-speed ECM blower for near-silent operation and industry-leading annual fuel savings. Lennox CK40HT Evaporator Coil: The Lennox CK40HT is an all-aluminum horizontal evaporator coil featuring Quantum Coil technology for superior corrosion resistance and extended service life. Designed for upflow/horizontal configurations, it provides a precision match with Lennox Elite Series condensers. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 18.5 Condenser Model EL18KCV-024-230 Condenser Stages Variable Speed Furnace Model SLP99UHVK070XV36B Furnace Stages Variable Furnace Efficiency 99% Furnace Capacity (BTU) 70k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-30B Coil Cabinet Size B AHRI 216721759 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT EHB PRODUCT EHB PRODUCT EHB

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: Lennox EL18KCV Condenser: The Lennox EL18KCV is a 3-Ton variable-speed Elite Series air conditioner with up to 19.0 SEER2 efficiency, engineered for next-generation R-454B refrigerant. SilentComfort™ technology and an all-aluminum Quantum Coil deliver whisper-quiet operation, superior durability, and outstanding energy savings. Lennox SLP99 Furnace: The Lennox SLP99 is a 99% AFUE modulating gas furnace — among the highest residential efficiency available — featuring a fully variable gas valve and variable-speed ECM blower for near-silent operation and industry-leading annual fuel savings. Lennox CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased evaporator coil with Quantum Coil technology for superior corrosion resistance, built for upflow/downflow (vertical) installations. Engineered as a precision match for Lennox Elite Series condensers and furnaces. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 19.0 Condenser Model EL18KCV-036-230 Condenser Stages Variable Speed Furnace Model SLP99UHVK070XV36B Furnace Stages Variable Furnace Efficiency 99% Furnace Capacity (BTU) 70k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-36B Coil Cabinet Size B AHRI 216722046 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT EHB PRODUCT EHB PRODUCT EHB

Read more less